Got something to celebrate? Need for an award? No problem we got you covered with our nGen Gold Metallic. You can print as many awards as you want. Astonish yourself, the winner, with the fantastic results!
4 Item Items
Warning: Last items in stock!
colorFabb has teamed up with Eastman Chemical Company to develop co-polyester based materials for FFF/FDM 3D printing. Now you can fulfill your vision with 3D creations that exhibit sparkling clarity and gloss and superior toughness. With superior melt strength and dimensional stability, Amphora delivers advanced bridging capabilities to create stronger and more detailed items—with low odor and low emissions.
nGen is a low-odor, styrene-free choice that is uniquely suited for 3D printing applications. With Amphora, items can be created that are more functional, more durable, more efficient, and attractive.
nGen is made with Amphora AM3300 and has good flow properties through the printer nozzle - even at lower temperatures than some other polymers require. These properties make nGen more workable at a wider breadth of temperatures, producing reliable results and resulting in less waste. nGen exhibits advanced overhang ability, excellent looks, and large printing temperature range—empowering a large panel of users to create durable and useful items.
|General Properties||Test Method||Value|
|Specific Gravity||D 792||1.20 g/cm3|
|Mechanical Properties||Test Method||Value|
|Tensile Stress @ Yield||D 638||50 MPa (7210 psi)|
|Tensile Stress @ Break||D 638||35 MPa (6240 psi)|
|Elongation @ Yield||D 638||4.5%|
|Elongation @ Break||D 638||193%|
|Flexural Modulus||D 790||1800 MPa (2.60 x 105 psi )|
|Flexural Strength||D 790||67 MPa (9717 psi)|
|Rockwell Hardness, R Scale||D 785||105|
|Izod Impact Strength, Notched||D 256||70 J/m (@23°C); 38 J/m (@-40°C)|
|Thermal Properties||Test Method||Value|
|@ 0.455 MPa (66 psi)||D 648||71°C(160°F)|
|@ 1.82 MPa (264 psi)||D 648||63°C(145°F)|
|Typical Processing Conditions||Value|
|Processing Melt Temperature||210-240°C|
|Heated Bed Temperature||60°C|
|Cooling||0 to 100%|
|Layer Height||0.1 or 0.2 mm|
|Speed||30 to 100 mm/s|
|Infill||As needed up to 100%|
|Perimeter||Around 1 mm|
|Minimal Layer Time||4 sec|