100:1 Metal Gearmotor 20Dx44L mm 6V CB with Extended Motor Shaft View larger

Imaginile sunt utilizate exclusiv cu titlu de prezentare. Fotografiile nu creează obligații contractuale.

100:1 Metal Gearmotor 20Dx44L mm 6V CB with Extended Motor Shaft

0104110000070326

New product

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 100:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 × 2 mm extended motor shaft.


Key Specifications:

voltage no-load performance stall extrapolation
6 V 140 RPM, 150 mA 5.4 kg⋅cm (75 oz⋅in), 2.9 A

See Description for more details about the product.

Don't delay, buy today. Add to cart now!

More details

4 Items

109,00 lei
tax incl.

Valid in the limit of the available stock

The price includes the costs for collection, treatment and ellimination of WEEE

Add to wishlist

More info

These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different motors: 6 V and 12 V motors with long-life carbon brushes (CB), and a 6 V motor with shorter-life precious metal brushes. All three motors offer similar performances at their respective nominal voltages, just with the 12 V motor drawing approximately half the current of the 6 V motor and with the carbon brush versions having longer lifetimes than the one with precious metal brushes.

The CB versions (shown on the right in the picture below), can be differentiated from versions with percious metal brushes (shown on the left) by their copper-colored terminals.


00.jpg


01.jpg


These gearmotors are optionally available with an additional 2 mm-diameter output shaft that protrudes 6 mm from the rear of the motor (see the middle picture below). This rear shaft rotates at the same speed as the input to the gearbox and offers a way to add an encoder, such as our magnetic encoder for 20D mm metal gearmotors as shown in the right picture below, to provide motor speed or position feedback.


02.jpg


20D mm metal gearmotor CB with long-life carbon brushes.


03.jpg


20D mm metal gearmotor CB with long-life carbon brushes and an extended motor shaft.


e.jpg


Magnetic Encoder Kit for 20D mm Metal Gearmotors assembled on a 20D mm metal gearmotor with extended motor shaft.


The gearmotors all have 20 mm diameter gearboxes and 4 mm diameter gearbox output shafts, so it is generally easy to swap one version for another if your design requirements change (though the length of the gearbox tends to increase with the gear ratio).

Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. In order to avoid damaging the gearbox, we recommend keeping continuously applied loads under 5 kg-cm (75 oz-in) for the versions with carbon brushes (12V CB and 6V CB) and under 3.5 kg-cm (50 oz-in) for the versions with precious metal brushes. Stalls can also result in rapid (potentially on the order of seconds) thermal damage to the motor windings and brushes, especially for motors like this that can deliver a lot of power for their size; a general recommendation for brushed DC motors is to limit continuous current to approximately 25% of the stall current.


In general, these kinds of motors can run at voltages above and below their nominal voltages; lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 100:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 × 2 mm extended motor shaft.


Key specifications:

voltage no-load performance stall extrapolation
6 V 140 RPM, 150 mA 5.4 kg⋅cm (75 oz⋅in), 2.9 A


Dimensions


The diagram below shows the dimensions of the 20D mm line of metal gearmotors (units are mm over [inches]).


04.jpg


Dimensions of the Pololu 20D mm metal gearmotors. Units are mm over [inches]. This diagram only applies to the listed gear ratios.

Warning: Do not screw too far into the mounting holes as the screws can hit the gears. We recommend screwing no more than 3.5 mm (0.14″) into the M2.5 mounting holes.


Gearmotor accessories


The gearmotor face plate has two mounting holes threaded for M2.5 screws, and you can use our custom-designed 20D mm metal gearmotor bracket (shown in the left picture below) to mount the gearmotor to your project via these mounting holes and the screws that come with the bracket.


g.jpg


Pololu 20D mm metal gearmotor bracket pair with included hardware.



05.jpg



20D mm metal gearmotor with a univeral aluminum mounting hub and mounted on a 20D mm metal gearmotor bracket.


The 4 mm diameter gearbox output shaft works with Pololu universal aluminum mounting hub for 4mm shafts, which can be used to mount our larger Pololu wheels (60mm-, 70mm-, 80mm-, and 90mm-diameter) or custom wheels and mechanisms to the gearmotor’s output shaft as shown in the left picture below. Alternatively, you could use our 4mm scooter wheel adapter to mount many common scooter, skateboard, and inline skate wheels to the gearmotor’s output shaft as shown in the right picture below.


06.jpg


Pololu 70×8mm wheel mounted to a 20D mm metal gearmotor using a universal aluminum mounting hub for 4mm shafts.


j.jpg


A 20D mm gearmotor connected to a scooter wheel by the 4 mm scooter wheel adapter.


These motors also work with the hex adapters included with the 120mm-diameter Wild Thumper wheels (the left picture below shows a 20D mm gearmotor while the right picture shows a larger 25D mm gearmotor):


k.jpg


Dagu Wild Thumper wheel 120×60mm (metallic red) with Pololu 20D mm metal gearmotor.


L.jpg


Dagu Wild Thumper wheel 120×60mm (chrome) with Pololu 25D mm metal gearmotor.


For a general-purpose hex adapter, consider our 12mm hex wheel adapter, which lets you use this motor with many common hobby RC wheels.


m.jpg


12mm Hex Wheel Adapter for 4mm Shaft on a 20D mm Metal Gearmotor.


You can use our magnetic encoder kit for 20D mm metal gearmotors to provide motor speed or position feedback. Please note that this kit only works on gearmotor versions that have an extended motor shaft.


n.jpg


Magnetic Encoder Kit for 20D mm Metal Gearmotors assembled on a 20D mm metal gearmotor with extended motor shaft.


o.jpg


Magnetic Encoder Kit for 20D mm Metal Gearmotors assembled on a 20D mm metal gearmotor with extended motor shaft.


We have a number of motor controllers and motor drivers that work with these 20D mm metal gearmotors. In particular, we recommend our MC33296-based motor drivers, for which we have basic single and dual carriers and a dual-channel shield for Arduino. Our VNH5019-based motor drivers (available as single and dual carriers) also work well with these motors, and because they can handle higher currents, they will run much cooler than the MC33926 carriers. If you are looking for higher-level control interfaces, such as USB, RC, analog voltages, or serial, consider our SMC 18v7, Jrk 21v3, or TReX Jr.


p.jpg


Pololu dual MC33926 motor driver shield for Arduino.


q.jpg


VNH5019 motor driver carrier.


r.jpg


Simple Motor Controller 18v7, fully assembled.


We have an assortment of Hall effect-based current sensors to choose from for those who need to monitor motor current:


s.jpg


ACS711EX current sensor carrier -15.5A to +15.5A.


t.jpg


ACS714 current sensor carrier -5A to +5A.


Selecting the Right Gearmotor


We offer a wide selection of metal gearmotors that offer different combinations of speed and torque. Our metal gearmotor comparison table can help you find the motor that best meets your project’s requirements.


07.jpg


Don't delay, buy today.


Add to cart now!

Reviews

Write a review

100:1 Metal Gearmotor 20Dx44L mm 6V CB with Extended Motor Shaft

100:1 Metal Gearmotor 20Dx44L mm 6V CB with Extended Motor Shaft

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 100:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 × 2 mm extended motor shaft.


Key Specifications:

voltage no-load performance stall extrapolation
6 V 140 RPM, 150 mA 5.4 kg⋅cm (75 oz⋅in), 2.9 A

See Description for more details about the product.

Don't delay, buy today. Add to cart now!

EV SSL Certificate