Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
View larger
0104110000085146
New product
2-CH UART To Ethernet Converter, Serial Port Transparent Transmission Module
See description for more details about the product.
Add to cart now!
2 Item Items
Warning: Last items in stock!
Availability date:
Serial port transparent transmission

The 2-CH UART TO ETH provides an easy way to communicate between UART TTL and RJ45 Ethernet, allowing bi-directional transparent data transmission. It is easy to use, along with features like fast data rate, low power consumption, high stability, suits applications such as safety & security, IoT, and so on.
| OPERATING VOLTAGE | 3.3V/5V | OPERATING CURRENT | 140mA |
| OPERATING MODE | TCP/UDP | UART BAUDRATE | 300bps ~ 921.6Kbps |
| UART TTL LEVEL | 3.3V / 5V compatible | STORAGE TEMPERATURE | -55oC ~ 125oC |
| OPERATING TEMPERATURE | -40oC ~ 85oC | DIMENSIONS | 53.00 × 22.00mm |
Supports Host Boards Including Raspberry Pi/Arduino/STM32...

Bi-Direction Transparent Transmission Between UART TTL And Wired Ethernet






| 5V / 3V3 | power positive, use any pin of 5V/3.3V pins for power supply |
| GND | ground |
| RST1 | external reset input, low active |
| RESET | restore to factory setting, detected when chip poweron, low active |
| TXD1 | asynchronous UART 1 data output (enabled by default) |
| TXD2 | asynchronous UART 2 data output (disabled by default) |
| RXD1 | asynchronous UART 1 data input (enabled by default) |
| RXD2 | asynchronous UART 2 data input (disabled by default) |
| CFG0 | UART config mode, low level to enter configuration, high level to exit configuration |
| RUN | Operating status indicating pin |
| DIR1 | UART 1 RS485 RX/TX switch (connects to external RS485 controller) |
| DIR2 | UART 2 RS485 RX/TX switch (connects to external RS485 controller) |

Weight: 0.012 kg
The HC-05 Bluetooth module is a high...
$6.74
M6x15 mm Hexagonal Head Screw See description...
$0.17
This is a Triac module that can control a...
$6.48
Raspberry Pi Zero 2 W LIMITED TO ONE PER...
$20.55
Operating Voltage: 5VDC USB to Serial...
$2.40
Suitable for wire installation into network and...
$4.80
Letcon 40 W with Fludor ZD-211
$9.12
Test your network cables with this small...
$3.60
ENC28J60 Ethernet Mini Module See description...
$8.40
1.44'' LCD for STC, STM32 and Arduino Boards
$10.32