Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
SF13266
New product
Sparkfun MAX31855K Thermocouple Measurement Module is a 14-bit resolution data reader that makes it possible to measure the temperature. It is designed to be used in conjunction with a K-Type thermocouple.
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date:
The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a 'hot' end and a 'cold' one). Once this is achieved, a voltage potential is formed and current flows. The SparkFun Thermocouple Breakout takes a standard Type-K thermocouple in one end, digitizes the temperature measured and sends that data out the other end via a SPI interface, thereby interpreting the data and translating it for you to read!
With the SparkFun Thermocouple Breakout, the thermocouple’s hot junction can be read from -200 oC to +700 oC with an accuracy of ±2 oC while the cold junction, inside the MAX31855K, can only range from -20 oC to +85 oC while maintaining ±2 oC accuracy. The MAX31855K constantly measures the temperature of the cold junction using an internal temperature-sensing diode. The MAX31855K requires a power source from +3.0V to +3.6V (+3.0V nominal) and only draws 1.5mA maximum.
The Thermocouple Breakout is designed to accept a standard thermocouple connector, for convenience and compatibility with probes you may already own. These connectors aren’t necessary, and you could solder a thermocouple directly into the through-holes labeled ‘+’ and ‘-’. If you decide to solder the thermocouple directly to the breakout board, it is recommended that the thermocouple be mounted for strain relief to avoid breaking the thin wires. Notches for a zip-tie or wire wrapping have been provided in the PCB opposite the header for this purpose.
24 Gauge Hook up Stranded Wire Kit: It includes...
50,00 lei
Wouldn't it be cool to drive a tiny OLED...
58,41 lei
Blue 3p Screw Connector
1,49 lei
A flux with activators added to facilitate...
14,99 lei
10 cm 10p Male-Male Wires See description for...
2,85 lei
Fludor Metal Pump See description for more...
4,55 lei
Original product See description for more...
269,56 lei
LCD mode that communicates on the I2C interface...
16,34 lei
Linear potentiometer module useful for analog...
19,99 lei
0.96 inch diagonal OLED screen module with a...
23,79 lei