Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
78725
New product
See Description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date:
This SmartElex RLS-08 Analog & Digital Line Sensor Array has 8 IR LED/phototransistor pairs, making it a great detector for a line-following robot. Each sensor has its own digital and analog output also a potentiometer to adjust the sensitivity of the individual sensors.
The TCRT5000 reflectance sensors array is intended as a line sensor, but it can be used as a general-purpose proximity or reflectance sensor. The module is a convenient carrier for eight IR emitter and receiver (photoresistor/photodiodes) pairs evenly spaced at intervals.
Each phototransistor equips a pull-up resistor to form a voltage divider that produces an analog voltage output between 0 V and VIN (which is typically 5 V) as a function of the reflected IR. The lower output voltage is an indication of greater reflection.
The outputs are all independent, but the LEDs are arranged in pairs to halve current consumption. The LEDs are controlled by a MOSFET with a gate normally pulled high, allowing the LEDs to be turned off by setting the MOSFET gate to a low voltage. Turning the LEDs off might be advantageous for limiting power consumption when the sensors are not in use or for varying the effective brightness of the LEDs through PWM control.
The LED current-limiting resistors for 5 V operation are arranged in two stages; this allows a simple bypass of one stage to enable operation at 3.3 V. The LED current is approximately 20-25 mA, making the total board consumption just under 100 mA.
Specifications | |
---|---|
Operating Voltage(VDC) | 4.5 to 5.0 |
Supply Current (mA) | 150 |
Output | 8 Analog and Digital Voltage |
Optimal Sensing Distance (mm) | 3 |
Max. Reccomended Sensing Distance (mm) | 6 |
Distance between two IR sensor (mm) | 15 |
PCB Size (mm) | 126×26 |
Shipment Weight | 0.105 kg |
Shipment Dimensions | 10 × 5 × 3 cm |
Gearmotor with Wheel
14,99 lei
CY204/A 12 V 92x92x25 mm Fan See description...
9,99 lei
This adjustable load can perform instantaneous...
159,99 lei
MOSFET Module for 3D Printer Hot Bed See...
13,99 lei
MT60 Connector Pair (with Caps)
9,99 lei
Set of 4 Black Wheels
99,99 lei
Thermal Insulator for TEC12706 Peltier Modules...
1,89 lei
The HC-05 Bluetooth module is a high...
28,09 lei
These 35 mm long aluminum adapters convert a 6...
23,99 lei
Black Multi Adapter and SD Card Reader with USB...
11,99 lei