USB Multitester

Specifications

• Maximum measured voltage: 3.6 V - 32.5 V
• Accuracy: 0.01 V
• Maximum measured current: 0.00 A - 5.00 A
• Accuracy: 0.01 A
• Maximum metered electrical load: 999999 mAh
• Accuracy: 0.001 Ah
• Maximum metered power: 163 W
• Accuracy: 0.001 W
• Stopwatch up to 999 h 59 m 59 s
• Accuracy: 1 s
• Measurement refresh rate: 2 s
• Optimal operating temperature: -10 ^oC to +60 ^oC
• Optimal operating humidity: 10 - 80
• Product dimensions: 65 mm x 24 mm x 14 mm
• Input: USB type A female socket
• Output: USB type A male plug

Instructions

The device has a button at the top used to change the way information is displayed on the display, but also to reset certain parameters.

• Long press the button once to reset the following parameters to zero:
• Electric charge (mAh)
• Power (Wh)
• Stopwatch (T)
• Briefly press the button once to switch between display modes
• The default mode displays the following parameters:
• Measured voltage (V)
• Device temperature (^oC)
• Measured current (A)
• Electric charge (mAh)
• Power consumed (Wh)
• Stopwatch (T)
• USB tester:
• Measured voltage (V)
• Measured current (A)
• Instantaneous power (W)
• Power consumed (Wh)
• Stopwatch
• Briefly press the button twice to reset the power (Wh) to zero;
• Briefly press the button 3 times to reset the timer (T) to zero;

The device also stores the values ​​displayed on the screen, so they will not be reset automatically if you turn off the power for it.

Don't delay, buy today.

Add to cart now!