Sale! StoneFil Sample Pack (2.85 mm) View larger
Imaginile sunt utilizate exclusiv cu titlu de prezentare. Fotografiile nu creează obligații contractuale.

FormFutura StoneFil Sample Pack (2.85 mm)

0104110000081414

New product

StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.


See description for more details about the product.

Add to cart now!

More details

1 Item

Warning: Last items in stock!

60,73 lei
tax incl.

Valid in the limit of the available stock

The price includes the costs for collection, treatment and ellimination of WEEE

-88,27 lei

149,00 lei tax incl.

Add to wishlist

More info

Description

StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.

This high "stone filling" has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than "normal" PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.

This StoneFil Sample Pack contains the following samples (50g each):

  • StoneFil - Concrete
  • StoneFil - Granite
  • StoneFil - Pottery Clay
  • StoneFil - Terracotta


Unique features

  • Easy to print
  • 50% gravimetric powdered stone filling
    • ±37% heavier than "normal" PLA
  • Matte and rough stone-like finish
  • Unique natural/organic gradient colour linings
    • Every print has its unique natural stone gradient colour shading


General printing guidelines

Nozzle size: ≥ 0.4mm  Layer height: ≥ 0.15mm  Flow rate: ± 110%
Print temp: ± 215 - 240oC Print speed: High / Medium  Retraction: Yes ± 5mm
Heat bed: ± 0 - 60oC Fan speed: 50-100% Experience level: Beginner

* Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.


Abrasiveness

StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.

ρ: 1.70 g/cc 50 gr coil 0.5 Kg spool
Ø 1.75mm ± 12.2m ± 122m
Ø 2.85mm ± 4.6m ± 46m

Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.


Compliance

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

* This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.


Don't delay. Buy today.


Add to cart now!

Reviews

Write a review

FormFutura StoneFil Sample Pack (2.85 mm)

FormFutura StoneFil Sample Pack (2.85 mm)

StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.


See description for more details about the product.

Add to cart now!