Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
Type: PIR Switch Working Voltage/Frequency: AC110-240V, 50/60Hz Sensing Distance: 4-6m Fitting Diameter: 40 mm Angle Coverage: 110 degrees See description for more details about the product. Add to cart now!
PIR2 is a 433 MHz RF PIR motion sensor that for human detection. See description for more details about the product. Add to cart now!
Auto-Calibrating Line Sensor See description for more details about the product. Add to cart now!
Obstacle Contact Sensor See description for more details about the product. Add to cart now!
CMYcam5 Pixy Image Sensor See description for more details about the product. Add to cart now!
This RGB and Gesture Sensor, a small breakout board with a built-in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your hand! See description for more details...
IMU 9-DOF CJMCU BNO055 Orientation Sensor
This carrier for ST’s LPS25H digital barometer measures pressures from 260 mbar to 1260 mbar with absolute accuracy down to ±0.2 mbar and typical RMS noise of 0.01 mbar in high-resolution mode. See description for more details about the product. Add to cart now!
US-026 is a high-performance, low-cost ultrasonic distance measurement module. The module adopts the cost-effective ultrasonic measurement module. It has distance chip CS100; ranging up to 6 meters or more, with high ranging accuracy; good measurement consistency, stable and reliable ranging. See Description for more details about the product. Add to...
HC-SR04P Ultrasonic Distance Sensor (3 - 5.5 V)
This board is a simple carrier of Allegro’s bidirectional ±5A ACS724LLCTR-05AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 5 A and outputs a proportional analog voltage (400 mV/A) centered...
This board is a simple carrier of Allegro’s ±25A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 25 A and outputs a proportional analog voltage centered at Vcc/2...
TH Sensor-AM2301 See description for more details about the product. Add to cart now!
SHT31 Temperature and Humidity Sensor Probe
This module can measure temperature and humidity with high accuracy, has calibrated digital output, is stable and reliable. See Description for more details about the product. Add to cart now!
This board is a simple carrier of Allegro’s ±31 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 31 A and outputs a proportional analog voltage centered at Vcc/2...
Operating Voltage: 5V Output Voltage: 0.5~4.5V Accuracy: 1% FS Thread Size: G 1/4" See description for more details about the product. Add to cart now!
This board is a simple carrier of Allegro’s ±15.5 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. See description for more details about the product. Add to cart now!
This board is a simple carrier of Allegro’s ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation up to 2.1 kV RMS. The sensor has optimized accuracy for currents from -37.5 A to 37.5 A, and the analog voltage output is linear for current magnitudes...
This board is a simple carrier of Broadcom’s bidirectional ±20A ACHS-7122 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 20 A and outputs a proportional analog voltage (100 mV/A) centered at 2.5...
This board is a simple carrier of Broadcom’s bidirectional ±30A ACHS-7123 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 30 A and outputs a proportional analog voltage (66 mV/A) centered at 2.5 V...
This board is a simple carrier of Broadcom’s bidirectional ±10A ACHS-7121 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 10 A and outputs a proportional analog voltage (185 mV/A) centered at 2.5...
Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor See description for more details about the product. Add to cart now!
MS1100 Gas Concentration Senzor for Formaldehydes and Benzens See description for more details about the product. Add to cart now!
Adopts Precision Compensation Technology High Accuracy Sensor Suitable For Gas,Liquid,Oil Stainless Steel Body See description for more details about the product. Add to cart now!
This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. See description for more details about the product. Add to cart now!
DW1: 433MHz RF Door Window Alarm Sensor
This sensor with 0.5 m cable is for precision temperature sensing which can be used in laboratory, industrial processes, and more. See description for more details about the product. Add to cart now!
Wireless Temperature and Humidity Sensor TH16
Wireless Temperature and Humidity Sensor TH10
HC-SR04 Ultrasonic Sensor See Description for more details about the product. Add to cart now!
Photoelectric beam sensor, retro reflection - PEM10D See description for more details about the product. Add to cart now!
Your wearable can now keep you from getting sunburnt, with the Flora digital UV index sensor. We took our popular SI1145 UV index sensor and cut out everything you don't need for using with a Flora. It's small, round, and connects to the I2C bus pads. See description for more details about the product. Add to cart now!
This shield features a 10-degree motion sensor with an accelerometer / magnetometer / gyroscope, temperature sensor and pressure / barometric altitude sensor. See description for more details about the product. Add to cart now!
DHT12 sensor detect the surrounding humidity and temperature. This is an upgraded version of the classic DHT11 humidity temperature sensor and it is fully downward compatible, more precise and adds an I2C interface. It supports single bus and I2C communication See Description for more details about the product. Add to cart now!
The MonkMakes Sensor Board for micro:bit allows you to sense sound level, temperature and light level. Connects easily to the microbit with crocodile leads. See description for more details about the product. Add to cart now!
This is DHT11 sensor Shield for measuring temperature and humidity. It is accurate and inexpensive sensor that includes an ADC to convert analog values of humidity and temperature. 8-bit microcontroller in the sensor is used for data conversion. See description for more details about the product. Add to cart now!
DHT22- digital sensor for detecting the temperature and humidity in the environment. Unlike his predecessor DHT11, it has a high level of measuring accuracy and can be used on the street. See description for more details about the product. Add to cart now!
Detect six distinct channels of visible light with this fancy-pants spectral sensor! See Description for more details about the product. Add to cart now!
Magnetic Temperature Probe with 10 kΩ NTC Thermistor (5 m Cable)
Magnetic Temperature Probe with 10 kΩ NTC Thermistor (10 m Cable)
Magnetic Temperature Probe with 10 kΩ NTC Thermistor (4 m Cable)
Infrared (IR) break-beam sensors are a simple way to detect motion. See description for more details about the product. Add to cart now!
Flow Range: 0.3 to 6L Input/Output Diameter: 6.5mm Working voltage range: DC 5~24V Max. working current: 15mA (DC 5V) Load capability: <= 10mA (DC 5V) See description for more details about the product. Add to cart now!
This is a camera compatible with any version of Raspberry Pi with infrared night vision. Its focus is also adjustable depending on the user's preference / object distance. See description for more details about the product. Add to cart now!
Fermion: MEMS Gas Sensor - MiCS-2714 (Breakout) See description for more details about the product. Add to cart now!
Fermion: BMP280 Digital Pressure Sensor (Breakout) See description for more details about the product. Add to cart now!
Fermion: TMF8801 ToF Distance Ranging Sensor (20-2500mm) (Breakout) See description for more details about the product. Add to cart now!