Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
Viewed products
DFRobot FireBeetle series are low...
SmartDriveDuo60 has smart features of...
A voltage boost that can boost the...
A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino-compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection range, and two illumination LEDs. See Description for more details about the product. Add to cart now!
This carrier for ST’s LPS25H digital barometer measures pressures from 260 mbar to 1260 mbar with absolute accuracy down to ±0.2 mbar and typical RMS noise of 0.01 mbar in high-resolution mode. See description for more details about the product. Add to cart now!
IMU 9-DOF CJMCU BNO055 Orientation Sensor
If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope, and magnetometer into actual "3D space orientation"! See description for more details about the product. Add to cart now!
Obstacle Contact Sensor See description for more details about the product. Add to cart now!
This photoelectric sensor is a very efficient sensor that can be used in a variety of applications that require speed detection, pulse counting and position control. See description for more details about the product. Add to cart now!
PIR2 is a 433 MHz RF PIR motion sensor that for human detection. See description for more details about the product. Add to cart now!
Type: PIR Switch Working Voltage/Frequency: AC110-240V, 50/60Hz Sensing Distance: 4-6m Fitting Diameter: 40 mm Angle Coverage: 110 degrees See description for more details about the product. Add to cart now!
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage and separate controls for the odd and even emitters. In general, the closer the object, the higher the contrast between light...
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage. In general, the closer the object, the higher the contrast between light and dark readings, but high-reflectance objects are...
The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8" to 60" (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to sonar in some applications. The distance is indicated by an analog voltage, making this sensor very easy to use. See Description for more details...
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage. In general, the closer the object, the higher the contrast between light and dark readings, but high-reflectance objects are...
Measure indoor air quality - total volatile organic compounds (TVOC) and equivalent CO2 (eCO2) - with this digital sensor for Raspberry Pi and Arduino. See Description for more details about the product. Add to cart now!
The QTR-L-1A reflectance sensor incorporates a right-angle infrared LED and a right-angle phototransistor in an inexpensive, tiny 0.35" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line following. The reflectance measurement is output as an analog voltage. This sensor is sold in packs of two units. See description...
Power Source: AC 220V (50Hz / 60Hz) Load type: 25-200W, lights or exhaust fan Delay time: 40s Detection Distance: within 8m Detection Angle: 180 degrees See description for more details about the product. Add to cart now!
Piezo Vibration Sensor - Small Vertical See description for more details about the product. Add to cart now!
Monitor air pollution cheaply and accurately with this matchbox-sized particulate matter (PM) sensor from Plantower! It senses particulates of various sizes (PM1, PM2.5, PM10) from sources like smoke, dust, pollen, metal and organic particles, and more See Description for more details about the product. Add to cart now!
The MAX30105 breakout is a sophisticated heart rate, oximeter, and smoke/particle sensor. Use it as a fun way to see your heartbeat, or to make LEDs or lights pulse in time with your heart. ???? It's Raspberry Pi and Arduino-compatible. See Description for more details about the product. Add to cart now!
The optical dust sensor is very effective in detecting fine particles and it is commonly used in air quality monitoring systems. See description for more details about the product. Add to cart now!
GP2Y1010AU0F Optical Dust Particle Sensor
Perfect for applications such as drones altimetry, robotics, level sensing, and more. See description for more details about the product. Add to cart now!
Perfect for applications such as drones altimetry, robotics, level sensing, and more. See description for more details about the product. Add to cart now!
This Optical Fingerprint Sensor is a method of capturing and comparing fingerprints. It is a system used in conjunction with a matching system to enable efficient authentication for secure spaces and devices. See description for more details about the product. Add to cart now!
Sensor Type: Non-Contact Water Level Sensor Operating Voltage: 5-12VDC Wire Length: 50cm Connector: 4Pin Connector See description for more details about the product. Add to cart now!
The QTR-1RC reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line following. The output is designed to be measured by a digital I/O line. This sensor is sold in packs of two units. See description for more details...
The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line following. The reflectance measurement is output as an analog voltage. This sensor is sold in packs of two units. See description for more details...
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage. In general, the closer the object, the higher the contrast between light and dark readings, but high-reflectance objects are...
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage. In general, the closer the object, the higher the contrast between light and dark readings, but high-reflectance objects are...
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage. In general, the closer the object, the higher the contrast between light and dark readings, but high-reflectance objects are...
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage. In general, the closer the object, the higher the contrast between light and dark readings, but high-reflectance objects are...
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage. In general, the closer the object, the higher the contrast between light and dark readings, but high-reflectance objects are...
HC-SR04 Ultrasonic Sensor See Description for more details about the product. Add to cart now!
Photoelectric beam sensor, retro reflection - PEM10D See description for more details about the product. Add to cart now!
Your wearable can now keep you from getting sunburnt, with the Flora digital UV index sensor. We took our popular SI1145 UV index sensor and cut out everything you don't need for using with a Flora. It's small, round, and connects to the I2C bus pads. See description for more details about the product. Add to cart now!
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. See description for more details about the product. Add to cart now!
Wireless Temperature and Humidity Sensor TH16
Wireless Temperature and Humidity Sensor TH10
Upgrade a project that uses a photocell with the GA1A12S202 analog light sensor. See description for more details about the product. Add to cart now!
DW1: 433MHz RF Door Window Alarm Sensor
Extend your light-sensing spectrum with this analog UV sensor module. It uses a UV photodiode, which can detect the 240-370nm range of light (which covers UVB and most of the UVA spectrum). See description for more details about the product. Add to cart now!
This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. See description for more details about the product. Add to cart now!
The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUS-compatible interface. See description for more details about the product. Add to cart now!
This product is a zero- drift bidirectional current sensor which can be used to monitor the current flowing from the power source to your project. See description for more details about the product. Add to cart now!
High performance bidirectional current sensor based on Hall effect. See description for more details about the product. Add to cart now!
This is the breakout board for the fully integrated hall effect based linear current sensor ACS756.
This breakout board will solve all your power-monitoring problems. See description for more details about the product. Add to cart now!
This board is a simple carrier of Allegro’s unidirectional 30A ACS724LLCTR-30AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 30 A and outputs a proportional analog voltage (133 mV/A) that measures 500 mV...
This board is a simple carrier of Allegro’s unidirectional 10A ACS724LLCTR-10AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 10 A and outputs a proportional analog voltage (400 mV/A) that measures 500 mV...