Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
Motors
- Stock Clearance
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
-
Filaments
- ABS Filaments
-
PLA Filaments
- Classic PLA Filaments
- EasyPrint PLA Filaments
- HD PLA Filaments
- Easy PLA Filaments
- Mineral PLA Filaments
- PLA PRO Filaments
- Ingeo 3D850 PLA Filaments
- Ingeo 3D870 PLA Filaments
- PHA / PLA Filaments
- Glitter PLA
- Premium PLA
- EasyFil PLA
- GalaxyPLA
- Volcano PLA
- Armour-D PLA
- Silk Gloss PLA
- Matt PLA
- ReForm rPLA
- MagicFil Thermo PLA
- PLA Special Filament
- High Speed PLA
- Chameleon PLA
- Nylon Filaments
- PETG Filaments
- ASA Filaments
- HIPS Filaments
- Lemn Filaments
- Metal Filaments
- Glossy Polymer Filaments
- Carbon Fiber Filaments
- PVA Filaments
- Flexible Filaments
- Other Filaments
- Coating Liquid
- Co-polyesters Filaments
- Composite Materials Filament
- STYX-12
- Thibra3D Skulpt
- Arnite® ID 3040
- Novamid® ID 1030 (PA6/66)
- Poliamide
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- ODROID Boards
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Pycom Boards
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Resealed
- Storage systems
- Flotilla modules
Manufacturers
-
1.75 mm, 1 kg PLA Filament for 3D Printer - Pink
You can easily print with this PLA...
69,99 lei 79,99 lei
Motors There are 382 products.
-
488:1 Metal Gearmotor 20Dx46L mm 6V CB with Extended Motor Shaft
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 488.3:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This...
79,00 lei 119,00 leiOut of stock -
488:1 Metal Gearmotor 20Dx46L mm 6V CB
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 488.3:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. Key...
89,99 lei 99,99 leiOut of stock -
47:1 Metal Gearmotor 25Dx67L mm HP 6V with 48 CPR Encoder
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 46.85:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 2248.86 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in...
119,00 lei 159,00 leiOut of stock -
4.41 Metal Gearmotor 25Dx63L mm HP 6V with 48 CPR Encoder
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in...
119,00 lei 159,00 leiOut of stock -
34:1 Metal Gearmotor 25Dx67L mm HP 6V with 48 CPR Encoder
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 34.014:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 1632.67 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm...
129,00 lei 159,00 leiOut of stock -
34:1 Metal Gearmotor 25Dx52L mm HP 6V
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 34.014:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. This gearmotor is also available with an integrated encoder. Key...
102,99 lei 112,99 leiOut of stock -
31:1 Metal Gearmotor 20Dx41L mm 6V CB with Extended Motor Shaft
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 31.25:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This...
79,00 lei 109,00 leiOut of stock -
10:1 Metal Gearmotor 37Dx65L mm 12V with 64 CPR Encoder (Helical Pinion)
This gearmotor is a powerful 12V brushed DC motor with a 10:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 640 counts per revolution of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first...
207,99 leiOut of stock -
20BYJ01-160HR Stepper Motor with Gearbox
20BYJ01-160HR Stepper Motor with Gearbox
7,49 leiOut of stock -
-
15 mm 2 Phase Stepper Motor with Metal Gearbox
15 mm 2 Phase Stepper Motor with Metal Gearbox
39,99 leiOut of stock -
-
-
17HS8401S Stepper Motor (1.7 A, 0.59 Nm)
2 Review(s)• Low noise • Low heat • Smooth operation • Good acceleration performance See description for more details about the product. Add to cart now!
34,99 leiOut of stock -
17HS19-1684S-PG5 Geared Motor
Specifications • Good Torque Good Speed • 0.35 deg. Step Angle • NEMA 17 bipolar 4-wire • Planetary Gearbox Ratio 5.18:1 • Rated current 1.68A & resistance 1.65ohms See description for more details about the product. Add to cart now!
114,99 leiOut of stock -
156:1 Metal Gearmotor 20Dx44L mm 6V CB
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 156.3:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. Key...
99,99 leiOut of stock -
125:1 Metal Gearmotor 20Dx44L mm 6V CB
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 125:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. Key...
69,99 lei 99,99 leiOut of stock -
Plusivo 23HS5628 Stepper Motor
Can be applied for 3D printer, machinery, and equipment. 23HS5628 stepper motor features step angle of 1.8 degrees and holding the torque of 12600g.cm. Lower noise and running temperature. See description for more details about the product. Add to cart now!
89,99 leiOut of stock -
-
6 mm Stepper Motor with Sliding Plate and Wires
6 mm stepper motor with sliding plate and wires suitable for applications that require a small space. See description for more details about the product. Add to cart now!
39,00 leiOut of stock -
75:1 Metal Gearmotor 25Dx69L mm HP 6V with 48 CPR Encoder
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 74.83:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 3591.84 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in...
199,99 lei 239,99 leiOut of stock -
12V Motor with 64 CPR Encoder for 37D mm Metal Gearmotors (No Gearbox, Helical Pinion)
This is the motor and encoder portion of our 12V 37D mm metal gearmotors with 64 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our helical pinion 37D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes. It is intended for use at 12 V, though the motor...
89,00 lei 129,00 leiOut of stock -
HP 6V Motor with 48 CPR Encoder for 25D mm Metal Gearmotors (No Gearbox)
This is the motor and encoder portion of our high-power (HP), 6V 25D mm metal gearmotors with 48 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our 25D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes. Key specifications: voltage no-load...
109,00 lei 149,00 leiOut of stock -
99:1 Metal Gearmotor 25Dx69L mm HP 6V with 48 CPR Encoder
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 98.78:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 4741.44 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in...
129,00 lei 159,00 leiOut of stock -
99:1 Metal Gearmotor 25Dx54L mm HP 6V
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 98.78:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. This gearmotor is also available with an integrated encoder. Key specifications:...
99,00 lei 109,00 leiOut of stock -
9.7:1 Metal Gearmotor 25Dx63L mm HP 6V with 48 CPR Encoder
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 464.64 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in...
159,00 leiOut of stock -
78:1 Metal Gearmotor 20Dx43L mm 6V CB with Extended Motor Shaft
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 78.13:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This...
79,00 lei 109,00 leiOut of stock -
78:1 Metal Gearmotor 20Dx43L mm 6V CB
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 78.13:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. Key...
69,99 lei 99,99 leiOut of stock -
Sub-Micro Servo Motor HD-1440A
The HD-1440A analog servo from Power HD is one of the smallest servos we carry and is a great, inexpensive, tiny actuator for a small robot mechanism. Servo horns and associated hardware are included. Key specs at 6 V: 0.10 sec/60o, 11 oz-in (0.8 kg-cm), 4.4 g. See description for more details about the product. Add to cart now!
35,99 leiOut of stock -
Sub-Micro Plastic Planetary Gearmotor (6D x 16L mm, 26:1)
This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 26:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24") and an extremely light weight of 1.2 g (0.042 oz), making it a great actuator for miniature robots and very small mechanisms. Key specs at 6 V: 2500 RPM and 35 mA free-run, 1.5 oz-in (0.1...
64,99 leiOut of stock -
Pololu 136:1 Sub-Micro Plastic Planetary Gearmotor 6Dx19L mm
This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 136:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24") and an extremely light weight of 1.25 g (0.044 oz), making it a great actuator for miniature robots and very small mechanisms. Key specs at 6 V: 500 RPM and 45 mA free-run, 8 oz-in (0.6...
41,10 lei 64,99 leiOut of stock -
700:1 Sub-Micro Plastic Planetary Gearmotor 6Dx21L mm
This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 700:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24") and an extremely light weight of 1.3 g (0.046 oz), making it a great actuator for miniature robots and very small mechanisms. Key specs at 6 V: 90 RPM and 45 mA free-run, 12 oz-in (0.9...
50,99 leiOut of stock -
Sub-Micro Pololu Servo Motor 3.7 g
This generic sub-micro servo is one of the lightest servos we carry, weighing just 3.7 g (0.13 oz) without the lead. It is intended for use between 4.8 and 6 V (i.e. with 4- or 5-cell NiMH or NiCD battery packs). Servo horns and associated hardware are included. Key specs at 6 V: 0.07 sec/60°, 6 oz-in (0.4 kg-cm), 3.7 g (0.13 oz). See description for...
34,99 leiOut of stock -
17HS13-0404S-PG27 Geared Motor
D-cut Shaft,Top Selling, Torque type planetary gearbox, Gear ratio 26.85, Efficiency 81%, Rated current 0.40A, 2 Phase Bipolar, Nema 17 size, length 34mm(Motor) + 35mm(Gearbox) See description for more details about the product. Add to cart now!
149,99 leiOut of stock -
4 Brushless Motors 2206 Baby Beast V2 CW/CCW and 4 ESC AFRO 12 A - Pack
The new Easy combo from MultiStar and Afro, matching the most popular combinations into one easy package. See description for more details about the product. Add to cart now!
599,00 leiOut of stock -
17HS15-1684S-HG100 Geared Motor
Specifications • Precision type planetary gearbox • Nema 17 size, length: 39mm(Motor) + 58mm(Gearbox) • Gear ratio: 100, Efficiency: 90% • Rated current 1.68A, 2 Phase Bipolar See description for more details about the product. Add to cart now!
199,99 leiOut of stock -
KA15 Motor
K15 motor with a black gear and an external plastic shelf. See description for more details about the product. Add to cart now!
9,95 leiOut of stock -
JGB37-520 DC Gearmotor (88 RPM at 6 V)
This large and powerful JGB37-520 DC gearmotor is available in a wide range of operating voltages and speeds, suitable for almost any project. See description for more details about the product. Add to cart now!
69,00 leiOut of stock -
50:1 Metal Gearmotor 37Dx54L mm (Helical Pinion)
This gearmotor is a powerful brushed DC motor with 50:1 metal gearbox intended for operation at 12 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an...
169,00 leiOut of stock -
30:1 Metal Gearmotor 37Dx52L mm (Helical Pinion)
This gearmotor is a powerful brushed DC motor with 30:1 metal gearbox intended for operation at 12 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an...
169,00 leiOut of stock -
19:1 Metal Gearmotor 37Dx68L mm with 64 CPR Encoder (Helical Pinion)
This gearmotor is a powerful 12V brushed DC motor with a 18.75:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 1200 counts per revolution of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the...
199,00 leiOut of stock -
1632T 12V116 Gearmotor
1 Review(s)Motor with Reductor is simple but powerful, easy to use for a wide range of projects. The reducer engine can be used for a wide range of projects. It is recommended to use it with a DC speed controller and NOT use AC power. It is simple but powerful and reliable. See description for more details about the product. Add to cart now!
29,99 leiOut of stock -
150:1 Metal Gearmotor 37Dx73L mm with 64 CPR Encoder (Helical Pinion)
This gearmotor is a powerful 12V brushed DC motor with a 150:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 9600 counts per revolution of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first...
249,00 leiOut of stock -
70:1 Metal Gearmotor 37Dx54L mm (Helical Pinion)
This gearmotor is a powerful brushed DC motor with 70:1 metal gearbox intended for operation at 12 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an...
199,00 leiOut of stock -
150:1 Metal Gearmotor 37Dx57L mm (Helical Pinion)
This gearmotor is a powerful brushed DC motor with 150:1 metal gearbox intended for operation at 12 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an...
169,00 leiOut of stock -
1329Y 12V26 Gearmotor
Motor with Reductor is simple but powerful, easy to use for a wide range of projects. The reducer engine can be used for a wide range of projects. It is recommended to use it with a DC speed controller and NOT use AC power. It's simple but powerful and reliable.
24,99 leiOut of stock -
131:1 Metal Gearmotor 37Dx73L mm with 64 CPR Encoder (Helical Pinion)
This gearmotor is a powerful 12V brushed DC motor with a 131.25:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 8400 counts per revolution of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the...
325,99 leiOut of stock -
131:1 Metal Gearmotor 37Dx57L mm (Helical Pinion)
This gearmotor is a powerful brushed DC motor with 131.25:1 metal gearbox intended for operation at 12 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an...
169,00 leiOut of stock
