Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
Galaxy PLA is a deep metallic colored...
This CC2541 iBeacon Module is easy and quick to customize with very low cost housing. UUID, major, minor and other parameters can be changed according to customer needs. It is based on TI’s CC2541 / CR2032. With low power consumption and can support IOS 7.0, Andrews 4.3 and above. See description for more details about the product. Add to cart now!
The PCF7563 real-time clock module is ideal for time-dependent projects. The low power consumption, but also the small size make it ideal for any electronics project. See description for more details about the product. Add to cart now!
This is a 4.3-inch e-ink display module, supports a maximum resolution of 800x600, using serial communication, built-in Chinese and English fonts. See description for more details about the product. Add to cart now!
The module is an LED display with 7-segment digits, ready for use. The LEDs are connected in the common anode configuration. This module is useful in electronic assemblies with Arduino development boards where you need to display numeric data, such as temperatures. For each digit, there are pins A, B, C, D, E, F, G, and DP, respectively, for the next...
296x128, 2.9inch E-Ink display module See description for more details about the product. Add to cart now!
BTS7960 Motor Driver Module (43 A)
16 Channel I2C PWM Motor Driver Module See description for more details about the product. Add to cart now!
L9110S four-way drive DC motor drive board motor drive module smart car 4 way. See description for more details about the product. Add to cart now!
433 MHz Antenna, 7 dBi Gain with 3 m Cable
CJMCU DRV8833 Dual Motor Driver See description for more details about the product. Add to cart now!
This breakout board for the MPS MP6500 microstepping bipolar stepper motor driver has a pinout and interface that are very similar to that of our popular A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The MP6500 offers up to 1/8-step microstepping, operates from 4.5 V to 35 V, and can deliver up to...
240×240, General 1.54inch LCD Display Module, IPS, 65K RGB See description for more details about the product. Add to cart now!
200x200, 1.54inch E-Ink display module See description for more details about the product. Add to cart now!
This 5 A LED driver module is used in controlling LED with a very good efficiency of up to 96%. See description for more details about the product. Add to cart now!
Industrial serial server, RS485 to RJ45 Ethernet, TCP/IP to serial, rail-mount support, common ethernet port See description for more details about the product. Add to cart now!
Operating Voltage: 12 - 24VDC Output Power: 36W Supported Fast Charging Protocol: FCP,AFC,SFCP,SCP Long Lifespan See description for more details about the product. Add to cart now!
5V, 500mA wireless charging mode is useful for transmitting energy through the air through the electromagnetic field. See description for more details about the product. Add to cart now!
HX711 Instrumentation Module 33x20 mm
WTV020-SD Sound Module See description for more details about the product. Add to cart now!
Wow that's a tiny GPS antenna! See description for more details about the product. Add to cart now!
WT588DM01 Voice Playback Module (16 Mbit Memory) See description for more details about the product. Add to cart now!
FT232 USB UART Board (Type A) See description for more details about the product. Add to cart now!
This 2.4GHz 5dBi Flexible Antenna is can be use for IEEE 802.11 b/g/n, WLAN system or Bluetooth, Wireless communication system, Wi-Fi, WiMAX and MIMO system. With its stregh or signal gain of 5dBi, it can cover about 500 meters. See description for more details about the product. Add to cart now!
Product: 6Pin FTDI FT232RL FT232 Module For Arduino USB to TTL UART Connector type: USB To TTL RS232 Input Supply voltage: 3.3 ~ 5V The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB See description for more details about the product. Add to cart now!
Board can be used to generate PWM signals for the stepper motor driver Operating Voltage: 12VDC Three Frequency Range Forward and Reverse Function See description for more details about the product. Add to cart now!
The 2-Axis Stabilized Brushless Gimbal w/ Motor & Controller for Gopro Hero 1/2/3 Camera Mount is an easy to adjust two-axis brushless gimbal camera mount. It comes assembled, just install battery and camera. See description for more details about the product. Add to cart now!
GP-01 is a high-performance BDS/GNSS multi-mode satellite navigation receiver SOC module, which integrates RF front-end, digital baseband processor, 32-bit RISC CPU, power management and active antenna detection and protection functions.
GP-02 is a high-performance BDS/GNSS multi-mode satellite navigation receiver SOC module, which integrates RF front-end, digital baseband processor, 32-bit RISC CPU, power management and active antenna detection and protection functions.
This module is a DTU (Data Transfer Unit) with which serial data (from RS232) or IP can be transmitted over the GPRS network. Uses TCP / IP protocol and GPRS technology. See description for more details about the product. Add to cart now!
This features the u-blox NEO-6M GPS module with antenna and built-in EEPROM. This is compatible with various flight controller modules that provide GPS computer test software. See description for more details about the product. Add to cart now!
3 W LED Driver Module See description for more details about the product. Add to cart now!
433 MHz Antenna, 5 dBi Gain with 1 m Cable See description for more details about the product. Add to cart now!
MC33886 is an H-bridge driver, ideal for controlling the power of a bi-directional DC motor. It is capable of controlling a motor with loads up to 5A. It also has a PWM with maximum frequencies of 10 kHz. See description for more details about the product. Add to cart now!
433 MHz Antenna, 3 dBi Gain See description for more details about the product. Add to cart now!
The RTC module is an ultra low power type and can be connected directly to a Raspberry PI. Although it is designed to be compatible with this development plaque, it can be adapted and used with other types of microcontroller or plaques, such as Arduino. See description for more details about the product. Add to cart now!
This product represents an optimum antenna with operating frequency of 433 MHz and a gain of 4 dBi. See description for more details about the product. Add to cart now!
240×320, General 2inch IPS LCD Display Module See description for more details about the product. Add to cart now!
433 MHz (3 dBi) antenna useful for projects where you need a larger coverage radius for data transmitting circuits at 433 MHz. See description for more details about the product. Add to cart now!
The Light module detects ambient light level. It's ideal for use in a weather station, keeping track of light levels in your greenhouse, or reminding you when you've left the lights on in your house. See description for more details about the product. Add to cart now!
2.4 GHz Antenna for Wireless Modules with Adapter Cable
2.4 GHz Antenna with IPEX to SMA Adapter
The Dial module is... a dial! It has a rotary potentiometer and five bright white LEDs that illuminate as the dial is turned. See description for more details about the product. Add to cart now!
2-Channel Isolated RS485 Expansion HAT for Raspberry Pi The Raspberry Pi Board from the images is not included.See description for more details about the product. Add to cart now!
Type: PCF8575 Operating voltage: 2.5-5.5VDC Operating current: 100mA (max) I2C address: 0x20 (default), can be changed by soldering A1 and selection pads A2 See description for more details about the product. Add to cart now!
Dual Relay Module with USB Interface
Ideal for home automation, this module allows you to control high voltage devices (up to 250 VAC and supports currents up to 30 A). See description for more details about the product. Add to cart now!