Manufacturers
4 mm Golden Coupling Hub for 3 mm...
This an LM2596 DC-DC module with voltage display suitable for a wide range of applications which need a high-efficiency power converter. See description for more details about the product. Add to cart now!
3 W LED Driver Module See description for more details about the product. Add to cart now!
240×320, General 2inch IPS LCD Display Module See description for more details about the product. Add to cart now!
The RTC module is an ultra low power type and can be connected directly to a Raspberry PI. Although it is designed to be compatible with this development plaque, it can be adapted and used with other types of microcontroller or plaques, such as Arduino. See description for more details about the product. Add to cart now!
MC33886 is an H-bridge driver, ideal for controlling the power of a bi-directional DC motor. It is capable of controlling a motor with loads up to 5A. It also has a PWM with maximum frequencies of 10 kHz. See description for more details about the product. Add to cart now!
The module is an LED display with 7-segment digits, ready for use. The LEDs are connected in the common anode configuration. This module is useful in electronic assemblies with Arduino development boards where you need to display numeric data, such as temperatures. For each digit, there are pins A, B, C, D, E, F, G, and DP, respectively, for the next...
This 433 MHz USB Transceiver Module can be connected to computer USB port using the serial keyboard software control. It is also equivalent to an integrated multiple remote control equipment that can completely replace the remote control for signal transmission but it should be noted that it couldn’t directly simulate a remote control signal. See...
Type: PCF8575 Operating voltage: 2.5-5.5VDC Operating current: 100mA (max) I2C address: 0x20 (default), can be changed by soldering A1 and selection pads A2 See description for more details about the product. Add to cart now!
This is a PCF8574 IO expansion module suitable for MCU I/O expansion. See description for more details about the product. Add to cart now!
This module can bring you an extra 8 pins I/O and can mount 8 modules on the same I2C interface, for a total of 64 pins I/O. See description for more details about the product. Add to cart now!
MCP23017 16 bit I/O Expansion Module
LM2596 Step Down DC-DC Power Supply Module with LED See description for more details about the product. Add to cart now!
The product is suitable for your projects if you need to power a circuit that is capable of driving a 3 A load and converts input voltage between 5 V to 42 V. See description for more details about the product. Add to cart now!
PL2303 USB To UART (TTL) Communication Module V2, USB-A Connector See description for more details about the product. Add to cart now!
2-Channel Isolated RS485 Expansion HAT for Raspberry Pi The Raspberry Pi Board from the images is not included.See description for more details about the product. Add to cart now!
DC Power Jack for Case (5.5 mm Hole, 2.1 mm Pin) See description for more details about the product. Add to cart now!
This brilliant invention is a blessing for makers designing or using boards with standard 2.1mm DC barrel jacks. See description for more details about the product. Add to cart now!
2-CH UART To Ethernet Converter, Serial Port Transparent Transmission Module See description for more details about the product. Add to cart now!
The product is suitable for your projects if you need to power a circuit that is capable of driving a 3 A load and converts input voltage between 5 V to 42 V. See description for more details about the product. Add to cart now!
This DC-DC step down module is based on MP1584EN chip, this is capable of driving a 3 A load and converts input voltage between 4.5 V to 28 V into smaller voltage between 0.8 V to 20 V. See description for more details about the product. Add to cart now!
240×240, General 1.54inch LCD Display Module, IPS, 65K RGB See description for more details about the product. Add to cart now!
LM2596 step-down power supply module is designed to limit the input voltage. See description for more details about the product. Add to cart now!
LM2596 Step Down DC-DC Power Supply Module See description for more details about the product. Add to cart now!
296x128, 2.9inch E-Ink display module See description for more details about the product. Add to cart now!
200x200, 1.54inch E-Ink display module See description for more details about the product. Add to cart now!
4 mm Green Banana Plug Retractable Plug
WT588DM01 Voice Playback Module (16 Mbit Memory) See description for more details about the product. Add to cart now!
WTV020-SD Sound Module See description for more details about the product. Add to cart now!
Industrial serial server, RS485 to RJ45 Ethernet, TCP/IP to serial, rail-mount support, common ethernet port See description for more details about the product. Add to cart now!
HX711 Instrumentation Module 33x20 mm
5V, 500mA wireless charging mode is useful for transmitting energy through the air through the electromagnetic field. See description for more details about the product. Add to cart now!
Operating Voltage: 12 - 24VDC Output Power: 36W Supported Fast Charging Protocol: FCP,AFC,SFCP,SCP Long Lifespan See description for more details about the product. Add to cart now!
This breakout board for Texas Instruments’s TPS2113A autoswitching power multiplexer allows you to select which of two power sources is connected to a load while blocking reverse current into either of the sources. It has an adjustable current limit that can be set as high as 2 A and an adjustable switching threshold. Each input power rail on the...
This breakout board for Fairchild’s FPF1320 acts as a power multiplexer, allowing you to select which of two power sources is connected to a load while blocking reverse current into either of the sources. It handles up to 1.5 A of current at 1.5 V to 5.5 V and also breaks out a USB Micro-B connector that can be used to supply one of the input power rails....
Four-channel SPDT analog switches have a wide range of applications, including: sample and hold circuits, battery-powered equipment, audio and video signal routing, and communication circuits. See description for more details about the product. Add to cart now!
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 74.83:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. This gearmotor is also available with an integrated encoder. Key specifications:...
GP-02 is a high-performance BDS/GNSS multi-mode satellite navigation receiver SOC module, which integrates RF front-end, digital baseband processor, 32-bit RISC CPU, power management and active antenna detection and protection functions.
This adjustable DC-DC boost converter can be operated from 10 V to 32 V and it can output a voltage up to 35 V. It can be used in powering up various electronic devices and embedded systems. See description for more details about the product. Add to cart now!
COMFORT AND PRECISION Compact & lightweight design Plug & Play - no drivers required No mouse pad required See description for more details about the product. Add to cart now!
FT232 USB UART Board (Type A) See description for more details about the product. Add to cart now!
OBSOLETE Car MP3 player aux - FM Modulator(Red)
OBSOLETE Car MP3 player aux - FM Modulator(Green)
Product: 6Pin FTDI FT232RL FT232 Module For Arduino USB to TTL UART Connector type: USB To TTL RS232 Input Supply voltage: 3.3 ~ 5V The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB See description for more details about the product. Add to cart now!
GP-01 is a high-performance BDS/GNSS multi-mode satellite navigation receiver SOC module, which integrates RF front-end, digital baseband processor, 32-bit RISC CPU, power management and active antenna detection and protection functions.
The 2-Axis Stabilized Brushless Gimbal w/ Motor & Controller for Gopro Hero 1/2/3 Camera Mount is an easy to adjust two-axis brushless gimbal camera mount. It comes assembled, just install battery and camera. See description for more details about the product. Add to cart now!
Board can be used to generate PWM signals for the stepper motor driver Operating Voltage: 12VDC Three Frequency Range Forward and Reverse Function See description for more details about the product. Add to cart now!