Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
Piezoelectric Cleaning Transducer...
PJRC Shield with Audio Amplifier, Flash Memory and Led Driver for 3.2 Teensy and Teensy-LC See description for more details about the product. Add to cart now!
This shield features a 10-degree motion sensor with an accelerometer / magnetometer / gyroscope, temperature sensor and pressure / barometric altitude sensor. See description for more details about the product. Add to cart now!
This carrier for ST’s LPS25H digital barometer measures pressures from 260 mbar to 1260 mbar with absolute accuracy down to ±0.2 mbar and typical RMS noise of 0.01 mbar in high-resolution mode. See description for more details about the product. Add to cart now!
Type: PIR Switch Working Voltage/Frequency: AC110-240V, 50/60Hz Sensing Distance: 4-6m Fitting Diameter: 40 mm Angle Coverage: 110 degrees See description for more details about the product. Add to cart now!
This mini module features a light, color and distance sensor. It is based on the reflection of the IR waves emitted by the built-in LED and the output data is 16 bits. See description for more details about the product. Add to cart now!
A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino-compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection range, and two illumination LEDs. See Description for more details about the product. Add to cart now!
Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank! Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank! See description for more details about the product. Add to cart now!
PIR2 is a 433 MHz RF PIR motion sensor that for human detection. See description for more details about the product. Add to cart now!
This is 16-Channel 12-bit PWM and servo Shield for Arduino, perfect in building a robot. See description for more details about the product. Add to cart now!
The ultimate audio add-on for your Pi! pHAT BEAT gives you high-quality, digital, amplified, stereo audio and 16 beautiful little RGB LEDs, in two rows of 8, that are ideal as a VU meter, and 6 buttons to control your audio. See description for more details about the product. Add to cart now!
Obstacle Contact Sensor See description for more details about the product. Add to cart now!
This product is ideal for home-monitoring and home-automation projects. It has numerous relays, analog channels, power outputs and buffer inputs. So you can connect a lot of sensors, motors and more. See description for more details about the product. Add to cart now!
This high-performance temperature probe features adjustable resolution and a 1-wire interface it is capable of measuring the temperature in wet conditions. See description for more details about the product. Add to cart now!
This MAX6675 temperature sensor is suitable for your projects which require measuring high temperatures. This sensor can measure high temperatures with very low resolution but with high precision. The thermocouple is bought separately! See description for more details about the product. Add to cart now!
This sensor with 0.5 m cable is for precision temperature sensing which can be used in a laboratory, industrial processes, and more. See description for more details about the product. Add to cart now!
This sensor with 0.5 m cable is for precision temperature sensing which can be used in laboratory, industrial processes, and more. See description for more details about the product. Add to cart now!
micro:pixel Edge 1x10 WS2812B Board for micro:bit
Data Logging Red Shield for Arduino
TH Sensor-AM2301 See description for more details about the product. Add to cart now!
DHT22 Temperature-Humidity Sensor See description for more details about the product. Add to cart now!
This DS18B20 temperature sensor (TO-92) is very useful for temperature control in consumer products, industrial systems, and in many thermal measurement systems. See Description for more details about the product. Add to cart now!
This sensor is a carrier/breakout board for ST’s VL53L1X laser-ranging sensor, which offers fast and accurate ranging up to 4 m. It uses the time of flight (ToF) of invisible, eye-safe laser pulses to measure absolute distances independent of ambient lighting conditions and target characteristics like color, shape, and texture (though these things will...
Sound Sensor See description for more details about the product. Add to cart now!
100K 1% NTC Temperature Sensor See description for more details about the product. Add to cart now!
This shield with graphic LCD 2.4" touchscreen is perfect for your projects. See description for more details about the product. Add to cart now!
Offers WiFi connection to your Arduino board or project. See description for more details about the product. Add to cart now!
This is a Waterproof DS18B20 Temperature Sensor/Thermometer. The probe uses original DS18B20 temperature sensor chip. It is waterproof, moisture-proof and anti-rust with the high-quality stainless steel tube encapsulated. No other components, unique single bus interface. See description for more details about the product. Add to cart now!
This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25oC over the sensor's -40oC to +125oC range and precision of +0.0625oC. See description for more details about the product. Add to cart now!
This shield is an extension board for the Arduino Uno and contains a mini keyboard and LCD. See description for more details about the product. Add to cart now!
Cytron 10A Motor Driver Shield (Arduino)"SHIELD-MD10" is a compatible Arduino motor shield for controlling high current brushed DC motor up to 10A continuously. It is compatible with Arduino UNO, Arduino Duemilanove, Arduino Mega, Arduino Leonardo, CT-UNO and possibly other pin compatible main boards. See description for more details about the product....
This diffuser will give your pHAT lovely bokeh! See description for more details about the product. Add to cart now!
This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. See description for more details about the product. Add to cart now!
The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUS-compatible interface. See description for more details about the product. Add to cart now!
This board is a simple carrier of Allegro’s unidirectional 30A ACS724LLCTR-30AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 30 A and outputs a proportional analog voltage (133 mV/A) that measures 500 mV...
This is the breakout board for the fully integrated hall effect based linear current sensor ACS756.
High performance bidirectional current sensor based on Hall effect. See description for more details about the product. Add to cart now!
This product is a zero- drift bidirectional current sensor which can be used to monitor the current flowing from the power source to your project. See description for more details about the product. Add to cart now!
This board is a simple carrier of Allegro’s bidirectional ±50A ACS724LLCTR-50AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 50 A and outputs a proportional analog voltage (40 mV/A) centered...
The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8" to 60" (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to sonar in some applications. The distance is indicated by an analog voltage, making this sensor very easy to use. See Description for more details...
This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). See description for more details about the product. Add to cart now!
This board is a simple carrier of Allegro’s unidirectional 10A ACS724LLCTR-10AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 10 A and outputs a proportional analog voltage (400 mV/A) that measures 500 mV...
This board is a simple carrier of Allegro’s bidirectional ±5A ACS724LLCTR-05AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 5 A and outputs a proportional analog voltage (400 mV/A) centered...
VL53LDK TOF Based LIDAR Laser Distance Sensor See description for more details about the product. Add to cart now!
This board is a simple carrier of Broadcom’s bidirectional ±30A ACHS-7123 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 30 A and outputs a proportional analog voltage (66 mV/A) centered at 2.5 V...
Autoleveling Sensor for Tarantula 3D Printer See description for more details about the product. Add to cart now!
MS1100 Gas Concentration Senzor for Formaldehydes and Benzens See description for more details about the product. Add to cart now!
Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor See description for more details about the product. Add to cart now!
Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor See description for more details about the product. Add to cart now!