Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
SAKATA 3D PLA 850 filament is...
Viewed products
Plusivo V1022 USB Oscilloscope (2...
The FS90 analog servo from FEETECH is...
Stock clearance!
M4x5 mm Hexagonal Head Screw See description for more details about the product. Add to cart now!
M4x50 mm Hexagonal Head Screw See description for more details about the product. Add to cart now!
This ultrasonic (sonar) range finder features real-time automatic calibration and noise rejection resulting in virtually noise-free distance readings even in environments with changing acoustic and electrical noise. The sensor detects objects from 0 to 7.65 m (25 ft) and has a resolution of 1 cm (0.4") for distances beyond 20 cm (8"). The XL-MaxSonar...
This compact sonar range finder by Maxbotix detects objects from 0 to 6.45 m (21.2 ft) with a resolution of 2.5 cm (1") for distances beyond 15 cm (6"). Unlike other sonar range finders, the LV-MaxSonar has virtually no dead zone: it can detect even small objects up to and touching the front sensor face! See description for more details about the...
Works with ODROID seriesAndroid and Linux compatible See description for more details about the product. Add to cart now!
This compact (0.4" x 0.5") switching step-down (or buck) voltage regulator takes input voltages between 4 V and 50 V and efficiently reduces them to a lower, user-adjustable voltage set by an on-board trimmer potentiometer. It has an output voltage range of 2.5 V to 7.5 V and a maximum output current of 600 mA. It has a very low dropout, so it can be used...
SC16IS750 UART Module with I2C and SPI Interface
This product is ideal for collecting low voltages from devices such as mini-solar panels, thermoelectric generators and others. It can operate with voltages of at least 20 mV. See description for more details about the product. Add to cart now!
This DC to DC boost module converts low voltages between 2.5 V and 12 V to come to a fix voltage of 12 V. See description for more details about the product. Add to cart now!
With this source you can charge mobile phones or other devices that need charging voltage 5 V using a cell batteries at 3.7 V. See description for more details about the product. Add to cart now!
SN74LVC4245A 8 Channel Level Shifter Module
This device is a dual bidirectional I2C and SMBus voltage-level translator with an enable (EN) input and is operational from 1.2-V to 3.3-V VREF1 and 1.8-V to 5.5-V VREF2. See description for more details about the product. Add to cart now!
This powerful step-up/step-down regulator efficiently produces a fixed 6 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%. Its ability to convert both higher and lower input voltages makes it useful...
W600 Wireless Module with USB
This powerful step-up/step-down regulator efficiently produces a fixed 9 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%. Its ability to convert both higher and lower input voltages makes it useful...
10 kΩ NTC Thermistor with M4 Screw Hole (1 m Cable) See description for more details about the product. Add to cart now!
This BQ25570 has a lot of great features. It can be used as Ultra Low Power DC-DC Boost Charger, Energy Storage, Battery Charging and Protection, Battery Good Output Flag, Programmable Step Down Regulated Output (Buck) and Programmable Maximum Power Point Tracking (MPPT). See Description for more details about the product. Add to cart now!
10 kΩ NTC Thermistor with M4 Screw Hole (10 m Cable) See description for more details about the product. Add to cart now!
With some development boards, low power usage is an afterthought. Especially when price and usability are the main selling points. See description for more details about the product. Add to cart now!
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital...
10 kΩ NTC Thermistor with M4 Screw Hole (5 m Cable) See description for more details about the product. Add to cart now!
10 kΩ NTC Thermistor with M4 Screw Hole (3 m Cable) See description for more details about the product. Add to cart now!
The compact (0.5" x 0.7") D24V10F6 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V while allowing for a maximum output current of 1 A. This regulator offers typical efficiencies between 85% and 93% and has a very low dropout, so it can be used with input voltages as low as a few hundred millivolts...
10 kΩ NTC Thermistor with M4 Screw Hole (2 m Cable) See description for more details about the product. Add to cart now!
The Pololu Wixel is a general-purpose programmable module featuring a 2.4 GHz radio and USB. You can write your own software or load precompiled, open-source apps onto the TI CC2511F32 microcontroller at the heart of the Wixel, turning it into a wireless serial link, data logger, or whatever you need for your current project. With 29 KB of available flash...
This is the Adafruit Feather 32u4 LoRa Radio (RFM9x). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. See description for more information about the product. Add to cart now!
This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. An efficient voltage regulator (5.5 V...
This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors. An efficient voltage regulator (2.7 V...
This relay module with a light sensor can be used as a light detector and brightness detector through the potentiometer. It can be used to control a variety of street lights that automatically open at night and during the day automatically off, vehicle control and automation equipment. See description for more details about the product. Add to cart now!
Oh boy, this is a Big. Damn. Switch. Program it to switch loads up to 40V / 10A connected to the HT0740 breakout's sturdy screw terminals, and use up to four breakouts at the same time using the configurable I2C addresses. Great for home automation. See Description for more details about the product. Add to cart now!
M662 Countdown Timer Module (12 V) See description for more details about the product. Add to cart now!
Wireless Audio Transmission Module BLE Mono See description for more details about the product. Add to cart now!
This module can reverse voltages between 1.5 V and 5 V, with an efficiency of 86%. See description for more details about the product. Add to cart now!
Bluetooth Module Adapter with Clear Button
This module is based on a sensor that can measure the distance from an object by measuring the time that the light emitted by the IR LED is reflected back to it. It has I2C, serial and PWM interfaces, and can be connected and used with a lot of microcontrollers. See description for more details about the product. Add to cart now!
6 mm M2 Screw See description for more details about the product. Add to cart now!
It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. See description for more details about the product. Add to cart now!
This module is based on BMF055 sensor - 16-bit triaxial accelerometer, 16-bit triaxial gyroscope, triaxial magnetometer and 32-bit M0 + cortex microcontroller. The sensor has extremely small dimensions and with this module you can use it easily. See description for more details about the product. Add to cart now!
High quality T slot bolt screws for metric 20 series aluminium extrusions, suitable for most of 20 mm aluminium profiles. See description for more details about the product. Add to cart now!
16 mm M3 Screw See description for more details about the product. Add to cart now!
The Time-of-Flight principle (ToF) is a method for measuring the distance between a sensor and an object, based on the time difference between the emission of a signal and its return to the sensor, after being reflected by an object. This VL53L0X Time-of-Flight Distance Sensor Module is compatible and can be used with Arduino. It can measure up to 4 m...
14 mm M3 Screw See description for more details about the product. Add to cart now!
3 mm M3 Screw See description for more details about the product. Add to cart now!
TCS34725 RGB Color Sensor Module
25 mm M3 Screw See description for more details about the product. Add to cart now!
Proxxon spare mandrels, 10-piece set of 1-3/4-Inch long mandrels, 3/32-Inch shank. See description for more details about the product. Add to cart now!
Proxxon 28810 - Corundum Cutting Discs, 10 pcs., 22mm + Arbor
Fiber Reinforced Synthetic Resin Bonded Aluminum-Oxide Cut-Off Wheels are intended for cutting metal, nonferrous metal, alloys, and stainless steel. See description for more details about the product. Add to cart now!