CJMCU VL53L0X ToF Distance Measurement Sensor Module Light Speed Based

Description and specifications

Measure distances up to 2 m with this revolutionary sensor. It works on the principle of measuring the speed of light, it emits a beam of light and measures the time it is reflected back to the sensor. It can be easily integrated into many projects thanks to the I2C interface. Thanks to IR filters, the sensor also works in environments with putermic ambient light.

• Laser beam 940 m VSCEL
• Detection up to 2 m
• It is not influenced by the surface type of the object
• I2C interface with programmable address
• Pins reset and for interruptions
• Power: 2.6 - 3.5 V DC
• Working temperatures from -20^oC to 70^oC
• Frequency I2C up to 400 kHz, address 0 x 52

You can use this sensor to detect obstacles, recognize 1D gestures and much more.

The module helps you easily make connections - the package also includes a pinheader.

The Datasheet is available in the Downloads section below.

Instructions for use

1. Make the necessary hardware connections.

The communication protocol is I2C, so the data lines count at the SDA and SCL pins (A4 and A5 pins if you use an Arduino Uno-compatible development board). Also, the module does not tolerate 5 V so you need to use a logical-level translator.

Follow the attached chart below for more details:

2. Download the VL53L0X library and install it in the Arduino IDE development environment.

At the next address you will find the library to help you use this module more easily.

https://github.com/adafruit/Adafruit_VL53L0X

See the following link for more details on installing a library in Arduino IDE:

https://www.optimusdigital.ro/ro/content/10-tutorial-instalare-biblioteca

Don't delay, buy today.

Add to cart now!