Sale! FormFutura EasyWood Filament - Cedar, 1.75 mm, 500 g View larger

Imaginile sunt utilizate exclusiv cu titlu de prezentare. Fotografiile nu creează obligații contractuale.

FormFutura EasyWood Filament - Cedar, 1.75 mm, 500 g

8718924475867

New product

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles.


See Description for more details about the product.

Don't delay, buy today. Add to cart now!

More details

This product is no longer in stock

99,27 lei
tax incl.

Valid in the limit of the available stock

The price includes the costs for collection, treatment and ellimination of WEEE

-87,00 lei

186,27 lei tax incl.

Add to wishlist

More info

Description

EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature


Unique features

  • Extremely high wood-filling of 40%
    • Real wood feel, look and smell
  • Very easy to print
    • Warp-free printing and no deformation after cooling
    • Great thermal stability and filament flowing behaviour
    • Perfect first- and inter-layer adhesion
    • Can be printed at high printing speeds
  • Create wood-nerve structures
    • By postprocessing the printed object with a piece of fine grit sandpaper
    • By varying with the print/extrusion temperature
  • Biodegradable


General printing guidelines

Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Flow rate: ± 104%
Print temp: ± 210 - 240oC Print speed: Low Retraction: Yes ± 5mm
Heat bed: ± 0 - 60oC Fan speed: 50-100% Experience level: Beginner
*)Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.


Filament length

ρ: 1.20 g/cc 50 gr coil 0.5 Kg spool 2.3 Kg spool
Ø 1.75mm ± 17.3m ± 173m 797m
Ø 2.85mm ± 6.5m ± 65m 300m

Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.


Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Compliance

This filament is compliant to below listed directives and regulations.

• RoHS directive 2011/65/EC

• REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.


EasyWoodTM looks, feels and smells like real wood. EasyWood™ is a unique mixture of 40% grinded wood particles in combination with the modified and proven easy-to-print binding polymers used for our EasyFilTM PLA filaments. This extraordinary blend has resulted in a high-end and unsurpassed "easy to print" wooden filament. You can obtain a beautiful wood-nerve structure in your EasyWoodTM printed objects by grinding it a little bit with a piece of fine grit sandpaper. By grinding your printed object a bit you will highlight the relief, or rough edges/surfaces, of your printed object with different shades of the respective wood colour.

PropertiesTypical valueTest MethodTest condition
Physical
Specific gravity 1.20 g/cc  ASTM D1505 -
Melt flow rate 4.5 g/10min - -
Water absorption - - -
Moisture absorption - - -
Mechanical
Impact strength 7.1 KJ/m2 - -
Tensile strength 71 Mpa (MD) ASTM D882 -
Tensile modulus 1930 Mpa (MD) ASTM D882 -
Elongation at break 171% (MD) ASTM D882 -
Flexural strength ± 59.6 Mpa - -
Flexural modulus ± 2583.9 Mpa - -
Hardness - - -
Thermal
Print temperature ± 200 - 240oC - -
Melting temperature ± 145 ± 10oC - -
Viscat softening temp. ± 46oC ISO 306 -


Don't delay, buy today.


Add to cart now!

Reviews

Write a review

FormFutura EasyWood Filament - Cedar, 1.75 mm, 500 g

FormFutura EasyWood Filament - Cedar, 1.75 mm, 500 g

EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles.


See Description for more details about the product.

Don't delay, buy today. Add to cart now!

Customers who bought this product also bought:

Download