Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
0104110000085450
New product
128x128, General 1.5inch OLED display Module
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date:
This is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.
SYMBOL | DESCRIPTION |
VCC | Power (3.3~5V input) |
GND | Ground |
DIN | Data input |
CLK | Clock data input |
CS | Chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | Reset, low active |
There are two available drive interfaces for this OLED module: 4-wire SPI and I2C:
BS1 | BS2 | CS | DC | DIN | CLK | |
4-wire SPI | 0 | 0 | Chip select | Data/Command | MOSI | SCK |
I2C | 1 | 1 | NC | I2C address selection | SDA | SCL |
Weight: 0.02 kg
SMD Test Clip Green See description for more...
$0.31
OLED Module 0.49'' IIC 14 pins
$3.47
Green LED Bar with 10 Segments
$0.48
High performance gyroscope and triaxial...
$3.72
1.44'' LCD for STC, STM32 and Arduino Boards...
$9.60
Test Wiring 50 x 70 mm See description for...
$0.60
Genuine Product Raspberry Pi Pico is the...
$5.40
Board Compatible with Arduino Nano (ATmega328p...
$7.05
Cynel Solder 100 g 1 mm
$10.71
Ideal wires for making connections for...
$0.72