View larger
0104110000085160
New product
0.96inch OLED (B)
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date:
| DRIVER CHIP | 1306 |
| INTERFACE | 3-wire SPI, 4-wire SPI, I2C |
| RESOLUTION | 128*64 |
| DISPLAY SIZE | 0.96inch |
| COLORS | 1/4 yellow section, 3/4 blue section |
| VISIBLE ANGLE | >160oC |
| OPERATING TEMP. (oC) | -20~70 |
| STORAGE TEMP. (oC) | -30~80 |
| OPERATING VOLTAGE | 3.3V / 5V |
| APPLICABILITY | Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32 |
| PIN NO. | SYMBOL | DESCRIPTION |
| 1 | VCC | Power positive (3.3~5V power input) |
| 2 | GND | Ground |
| 3 | NC | NC |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip selection, low active |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, low active |
| MODE/INTERFACE | BS0/BS1 | DIN | SCK |
| 3-wire SPI | 1/0 | MOSI | SCLK |
| 4-wire SPI | 0/0 | ||
| I2C | 0/1 | SDA | SCL |
The 0.96inch OLED provides 2 options for the onboard pinheader:
_1.jpg)
Weight: 0.005 kg
20 cm 10p Female-Female Wires
4,95 lei
Original product
38,99 lei
The AMS1117-3.3 V voltage regulator module is...
3,56 lei
12 V 23 A Battery Holder
2,49 lei
This device can measure the speed of rotation...
79,99 lei
BME280 Barometric Pressure Sensor Module See...
73,99 lei
2.54 mm (40p) Green Pin Header See...
0,99 lei
This pin header is great for prototyping PCBs....
0,99 lei
This water level sensor is a low consumption...
1,73 lei
LCD mode that communicates on the I2C interface...
16,34 lei