Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
Creality CR-10-Mini 3D Printer with...
LV8729 Stepper Motor Driver 1/128 See description for more details about the product. Add to cart now!
This product contains a 5 V stepper motor and a stepper motor driver module based on the ULN2003A Darlington transistor array. See description for more details about the product. Add to cart now!
This dual motor driver comes in a compact form factor and is ideal for use in small robots. See description for more details about the product. Add to cart now!
Cytron 30A DC Motor Driver See description for more details about the product. Add to cart now!
The A4988 stepper motor driver is ideal for medium-sized stepper motors. This product is not manufactured by Pololu. See description for more details about the product. Add to cart now!
ESC 30A Brushless motors for the BEC (banana connectors). See description for more details about the product. Add to cart now!
A dual motor driver capable of supplying currents up to 5 A for each channel, bearing the tension between 5 V and 40 V. See description for more details about the product. Add to cart now!
The L298N engine driver module is ideal for controlling two small and medium engines. See description for more details about the product. Add to cart now!
Dual Motor Driver (6.5 - 27 V, 2 x 7 A) See description for more details about the product. Add to cart now!
This dual brushed DC motor driver, based on Freescale’s MC33926 full H-bridge, has a wide operating range of 5 V to 28 V and can deliver almost 3 A continuously (5 A peak) to each of its two motor channels. The MC33926 works with 3 V to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection,...
This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). See description for more details about the product. Add to cart now!
MDD10A is the dual-channel version of MD10C which is designed to drive 2 brushed DC motors with high current up to 10A continuously. See description for more details about the product. Add to cart now!
This is an Arduino compatible break out board for the A4988 microstepping stepper motor driver. It can drive a bipolar stepper motor with an output current of up to 2 A per coil. This is not a Pololu product. See description for more details about the product. Add to cart now!
The Jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position control, or it can be used without feedback as an open-loop speed control. The continuous...
Let your robotic dreams come true with the new DC+Stepper Motor Bonnet from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. See description for more details about the product. Add to cart now!
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter...
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 40 V operating range and can deliver continuous output...
Cytron 4 Channel Motor Driver See description for more details about the product. Add to cart now!
This is the newest version of EasyDriver module that provides much more flexibility and control in driving stepper motor. See description for more details about the product. Add to cart now!
The powerful Jrk 12v12 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used as an open-loop speed control or for closed-loop speed or position control. The continuous output current is approximately 12 A...
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver and ships with soldered header pins and terminal blocks....
This tiny breakout board for TI’s DRV8801 provides a modern alternative to classic motor drivers such as the L293D, SN754410, and L298N. It can deliver a continuous 1 A (2.8 A peak) to a single motor and offers a wide operating voltage range of 8 V to 36 V. The DRV8801 features a simple two-pin speed/direction interface, current-sense feedback, and...
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8825...
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2...
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S249FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.6 A per phase continuously...
The AMIS-30543 stepper motor driver carrier is a Pololu carrier for ON Semiconductor's AMIS-30543 micro-stepping motor driver, which is a high-performance stepper motor driver with advanced features not found on our other stepper motor driver carriers. See description for more details about the product. Add to cart now!
A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). See description for more details about the product. Add to cart now!
This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. It features a simple two-pin speed/direction interface and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature. See...
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its two integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great for higher-voltage motors and applications, and the shield can 1.7 A continuous (2.5 A peak) per motor. The shield can...
Motor Driver shield, dual channels, which offers 3A peak of current and 1.2A of current continuously at each channel. See description for more details about the product. Add to cart now!
This L298P dual motor driver shield uses a high power motor driver chip L298P to drive 2 DC motors and drive current up to 2 A. The motor output uses 8 high-speed Schottky diodes as a protection and can be directly inserted into your Arduino projects. See description for more details about the product. Add to cart now!
L293D motor shield, the input voltage DC 4.5 - 25 V. See description for more details about the product. Add to cart now!
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, Pi A+, Pi 2, or Pi 3 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The board can...
A4988 / DRV8825 Stepper Motor Driver Expansion Board See description for more details about the product. Add to cart now!
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" x 0.8" board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 25 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along...
This module can drive two DC motors at constant current of 1.2 A up to 3.2 A. It enhances the efficiency of traditional L298N. See description for more details about the product. Add to cart now!
This carrier board for ST’s VNH2SP30 motor driver IC operates from 5.5 to 16 V and can deliver a continuous 14 A (30 A peak). It works with 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback. Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current,...
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" x 0.8" board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along...
The Qwiic Haptic Motor Driver Kit includes an itty-bitty, Linear Resonant Actuator (LRA) vibration motor, wires, and the breakout board for Dialog Semiconductor's DA7280 motor driver IC for applications that require haptic feedback. This kit is intended for applications where the vibration motor needs to be mounted separately from the board. Please be...
This version of our MP6500 Stepper Motor Driver Carrier with Digital Current Control ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. See description for more details about the product. Add to cart now!
Haptic feedback can add a more professional level of interaction to your project. The same satisfying vibration you get when you receive a text message, phone call, or install a new app can be brought to your project using the Zio Haptic Motor Board. See description for more details about the product. Add to cart now!
This L293D motor driver module is ideal in driving a motor via wireless connection from a distance. It is designed with a socket for connecting WiFi ESP8266 plates. See description for more details about the product. Add to cart now!
Romeo BLE mini is a simplified version of Romeo board. See description for more details about the product. Add to cart now!
L9110S four-way drive DC motor drive board motor drive module smart car 4 way. See description for more details about the product. Add to cart now!
Crank up your robotics with a powerful Adafruit DRV8871 motor driver breakout board. This motor driver has a lot of great specs that make it useful for a wide variety of mechatronics. See description for more details about the product. Add to cart now!
CCM5D Digital PWM DC Motor Speed Controller With Display See description for more details about the product. Add to cart now!
This compact breakout board for ROHM’s BD65496MUV motor driver offers an operating voltage range of 2 V to 16 V and can deliver a continuous 1.2 A (5 A peak for a few milliseconds) to a single brushed DC motor. The motor driver features variable switching speed, allowing for PWM frequencies up to 500 kHz, two drive mode options, and built-in under-voltage...