Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
Power Electronics
- Stock Clearance
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
-
Filaments
- ABS Filaments
-
PLA Filaments
- Classic PLA Filaments
- EasyPrint PLA Filaments
- HD PLA Filaments
- Easy PLA Filaments
- Mineral PLA Filaments
- PLA PRO Filaments
- Ingeo 3D850 PLA Filaments
- Ingeo 3D870 PLA Filaments
- PHA / PLA Filaments
- Glitter PLA
- Premium PLA
- EasyFil PLA
- GalaxyPLA
- Volcano PLA
- Armour-D PLA
- Silk Gloss PLA
- Matt PLA
- ReForm rPLA
- MagicFil Thermo PLA
- PLA Special Filament
- High Speed PLA
- Chameleon PLA
- Nylon Filaments
- PETG Filaments
- ASA Filaments
- HIPS Filaments
- Lemn Filaments
- Metal Filaments
- Glossy Polymer Filaments
- Carbon Fiber Filaments
- PVA Filaments
- Flexible Filaments
- Other Filaments
- Coating Liquid
- Co-polyesters Filaments
- Composite Materials Filament
- STYX-12
- Thibra3D Skulpt
- Arnite® ID 3040
- Novamid® ID 1030 (PA6/66)
- Poliamide
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- ODROID Boards
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Pycom Boards
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Resealed
- Storage systems
- Flotilla modules
Manufacturers
-
NeoPixel FeatherWing - 4x8 RGB LED Add-on for All Feather Boards
A Feather board without ambition is a...
99,00 lei 119,00 lei
Power Electronics There are 470 products.
-
Pololu RC Switch with Medium Low-Side MOSFET
This RC switch converts hobby radio control pulses to digital on/off signals and has an integrated medium, low-side MOSFET that allows it to drive moderate loads (up to around 15 A), such as lighting or small actuators. The activation threshold and direction are configurable, and a safe-start feature reduces the likelihood of unexpected activation. The...
36,99 leiOut of stock -
Mini MOSFET Slide Switch with Reverse Voltage Protection, LV
This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 6 A at 2 V to 20 V. The board features reverse-voltage protection and also makes it easy to control the MOSFET with an external switch or the digital...
29,99 leiOut of stock -
Mini MOSFET Slide Switch with Reverse Voltage Protection, SV
This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 4 A at 4.5 V to 40 V. The board features reverse-voltage protection and also makes it easy to control the MOSFET with an external switch or the digital...
29,99 leiOut of stock -
Pololu RC Switch with Small Low-Side MOSFET
This RC switch converts hobby radio control pulses to digital on/off signals and has an integrated small, low-side MOSFET that allows it to drive small loads (up to around 3 A), such as lighting or small actuators. The activation threshold and direction are configurable, and a safe-start feature reduces the likelihood of unexpected activation. See...
32,99 leiOut of stock -
PCA9685 16-Channel PWM Controller with I2C Interface
PCA9685 16-Channel PWM Controller with I2C Interface
34,99 leiOut of stock -
Combat Robot Controller-Arduino Compatible
Combat Robot Controller-Arduino Compatible See description for more details about the product. Add to cart now!
139,00 lei 179,00 leiOut of stock -
30 A PWM Motor Speed Controller
1 Review(s)This pulse width modulation motor speed controller allows efficient varying of motor speed. See description for more details about the product. Add to cart now!
44,99 leiOut of stock -
Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates an MPS MP6500 driver and ships with...
86,99 leiOut of stock -
Mini Maestro 12-Channel USB Servo Controller (Assembled)
The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25 μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface...
299,99 leiOut of stock -
Mini Maestro 18-Channel USB Servo Controller (Assembled)
The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface...
199,99 leiOut of stock -
Micro Maestro 6-Channel USB Servo Controller (Assembled)
The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25 μs resolution with built-in speed and acceleration control) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB...
189,00 leiOut of stock -
Tic T249 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a Toshiba...
159,00 leiOut of stock -
Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver and ships with soldered header pins and terminal blocks....
158,99 leiOut of stock -
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (Connectors Soldered)
The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a...
325,00 leiOut of stock -
CCM5D Digital PWM DC Motor Speed Controller With Display
CCM5D Digital PWM DC Motor Speed Controller With Display See description for more details about the product. Add to cart now!
29,99 leiOut of stock -
Feetech Controller with 2 Channels for Servomotor
This controller can be used with Arduino or other PWM devices, the motor speed being directly proportional to the PWM. It is ideal for small robots. See description for more details about the product. Add to cart now!
24,99 leiOut of stock -
30 A ESC for Brushless Motors with BEC (with Connectors)
ESC 30A Brushless motors for the BEC (banana connectors). See description for more details about the product. Add to cart now!
39,99 leiOut of stock -
ESC Afro Slim 20 Amp (Firmware SimonK)
The new Esc slim from Afro is the ideal choice for multirotor projects, offering 20A in a compact and performance package. See description for more details about the product. Add to cart now!
79,99 leiOut of stock -
L9110 Dual Motor Driver
L9110 Dual Motor Driver See description for more details about the product. Add to cart now!
12,95 leiOut of stock -
Dual MAX14870 Motor Driver for Raspberry Pi (Partial Kit)
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its pair of integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great control option for small motors that run on a wide range of voltages. The board...
49,99 leiOut of stock -
Pololu G2 High-Power Motor Driver 18v17
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" x 0.8" board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 17 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along...
106,57 lei 139,00 leiOut of stock -
DRV8833 Motor Driver Module
DRV8833 Motor Driver Module See description for more details about the product. Add to cart now!
19,99 leiOut of stock -
Dual Motor Driver (6.5 - 27 V, 2 x 7 A)
Dual Motor Driver (6.5 - 27 V, 2 x 7 A) See description for more details about the product. Add to cart now!
38,99 leiOut of stock -
DRV8833 Dual Motor Driver Carrier
This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 V to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering small, low-voltage...
74,99 leiOut of stock -
MC33886 Dual Motor Driver
A dual motor driver capable of supplying currents up to 5 A for each channel, bearing the tension between 5 V and 40 V. See description for more details about the product. Add to cart now!
64,99 leiOut of stock -
Dual MC33926 Engine Driver for Raspberry Pi (Disassembled)
This add-on board enables a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+, to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. See description for more details about the product. Add to cart now!
169,99 leiOut of stock -
Dual Pololu DRV8835 Engine Driver
This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage,...
59,99 leiOut of stock -
TB6612FNG Dual Motor Driver (1 A)
1 Review(s)This module can drive two DC motors at constant current of 1.2 A up to 3.2 A. It enhances the efficiency of traditional L298N. See description for more details about the product. Add to cart now!
24,99 leiOut of stock -
A4988 Stepper Motor Driver Carrier, Black Edition
1 Review(s)This engine driver is built with four PCBs and delivers 20% more power than the classic (two-layer) version. Applies to voltages between 8 V and 35 V and delivers a 1.2 A current that can reach, with cooling, up to a maximum of 2 A. See description for more details about the product. Add to cart now!
34,09 leiOut of stock -
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S249FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.6 A per phase continuously...
129,00 leiOut of stock -
BTS7960 43 A Motor Driver
This motor driver is based on BTS7960 which is ideal for driving powerful engines and capable of delivering currents up to 43 A. See description for more details about the product. Add to cart now!
39,99 leiOut of stock -
SmartElex 15S DC Motor Driver 15A (30A Peak)
QUICK OVERVIEW Supply Voltage: 6.8-30 VDC. Continuous Current: 15 Amp. PWM Frequency: 20 KHz. Max Peak current: 30 Amp (For 10 Seconds). One brushed DC motor Bidirectional control. See description for more details about the product. Add to cart now!
53,55 leiOut of stock -
TB67S279FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
This version of our TB67S279FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S279FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.1 A per phase continuously...
44,99 leiOut of stock -
Pololu VNH2SP30 Driver for DC Motor Carrier MD01B
This carrier board for ST’s VNH2SP30 motor driver IC operates from 5.5 to 16 V and can deliver a continuous 14 A (30 A peak). It works with 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback. Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current,...
159,99 lei 169,99 leiOut of stock -
TB67S128FTG Stepper Motor Driver Carrier
1 Review(s)This breakout board makes it easy to use Toshiba’s TB67S128FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and microstepping down to 1/128-step. In addition, it has the ability to dynamically select an optimal decay mode by monitoring the actual motor current, and it can automatically reduce the driving current...
74,99 leiOut of stock -
MP6500 Stepper Motor Driver with Digital Current Control
This version of our MP6500 Stepper Motor Driver Carrier with Digital Current Control ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. See description for more details about the product. Add to cart now!
69,99 leiOut of stock -
MP6500 Stepper Motor Driver with Potentiometer for Current Control (Header Pins Soldered)
This version of our MP6500 Stepper Motor Driver Carrier with Potentiometer Current Control ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. See description for more details about the product. Add to cart now!
44,99 leiOut of stock -
STSPIN220 Low-Voltage Stepper Motor Driver
This breakout board for STMicro’s STSPIN220 low-voltage microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates from 1.8 V to 10 V, allowing stepper motors to be powered with voltages that are too low for other drivers. It can deliver up to approximately 1.1 A per phase continuously without a heat sink or forced air...
29,99 leiOut of stock -
STSPIN220 Low-Voltage Stepper Motor Driver (Header Pins Soldered)
This version of our STSPIN220 Low-Voltage Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the STSPIN220 Low-Voltage Stepper Motor Driver Carrier product page for more information about the driver. See description for more...
39,99 leiOut of stock -
STSPIN820 Stepper Motor Driver Carrier (Header Pins Soldered)
This version of our STSPIN820 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. See description for more details about the product. Add to cart now!
39,99 leiOut of stock -
TMC2208 Stepper Motor Driver
TMC2208 Stepper Motor Driver See description for more details about the product. Add to cart now!
32,99 leiOut of stock -
DRV8801 Driver for DC Motor with Brushes
This tiny breakout board for TI’s DRV8801 provides a modern alternative to classic motor drivers such as the L293D, SN754410, and L298N. It can deliver a continuous 1 A (2.8 A peak) to a single motor and offers a wide operating voltage range of 8 V to 36 V. The DRV8801 features a simple two-pin speed/direction interface, current-sense feedback, and...
78,99 leiOut of stock -
DRV8838 Single Brushed DC Motor Driver Carrier
This tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering a small, low-voltage motor. See...
18,99 leiOut of stock -
TB6600 Stepper Driver
TB6600 4A 42V Motor Driver Controller See description for more details about the product. Add to cart now!
39,99 leiOut of stock -
Dual VNH3SP30 Motor Driver Carrier MD03A
If you are looking to drive two high-power motors through one compact unit, these dual VNH3SP30 motor driver carriers are perfect for you. With these boards, it’s easy to get a medium-sized, differential drive robot running in no time. See description for more details about the product. Add to cart now!
229,99 leiOut of stock -
Pololu VNH5019 for DC Motor with Driver Carrier
This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along with built-in protection against reverse-voltage,...
319,99 leiOut of stock -
Miniature DC Motor Driver (2.2 - 10 V, 800 mA)
This module is perfect for applications such as smart cars, toy cars, robots with 2.2 V to 10 V input voltage. See description for more details about the product. Add to cart now!
9,99 leiOut of stock -
A4988 Stepper Motor Driver Carrier Pololu
This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is...
29,74 leiOut of stock
