Manufacturers
Helios Support is a water-soluble PVA...
Viewed products
10p 2.54 mm Male Pin Header (White)...
This 9 V DC-DC boost module is perfect for your projects that require higher voltage. This small module provides the ability to increase voltage and adjusted from 2.5 V to 9 V. See description for more details about the product. Add to cart now!
This compact (0.4" x 0.5") switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 7.5 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output. The pins have a 0.1" spacing, making...
Input voltage: 100 - 265VAC Output voltage: 12VDC Output current: 2A Frequency: 50HZ/60HZ See description for more details about the product. Add to cart now!
This product is a switching source with two symmetrical outputs, +12V and -12V, useful to power low-power logic circuits. It can provide a maximum current of 50mA or 30mA on the two channels, to a very small rip and very good efficiency. See description for more details about the product. Add to cart now!
The compact (0.4" x 0.5") D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 90% and 95% and has a very low dropout, so it can be used with input voltages as low as a few hundred...
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 7.5 V. The board measures only 0.7" x 0.7" yet delivers typical continuous output currents between 1.6 A and 2.4 A, depending on the input voltage, which makes this regulator well suited for powering moderate loads like sensors...
5V / 8V / 9V / 12V 1.5A Voltage Boost Module
Input voltage range: 5V-80V DC Output voltage range: 1.5V-20V DC adjustable Output current: 0-0.8A. High efficiency up to 90% Built-in thermal shutdown function Built-in current limit function Built output short protection function See description for more details about the product. Add to cart now!
Isolated Power Supply mode (220 V to 24 V, 0.2 A) useful to feed your projects directly to the mains voltage. See description for more details about the product. Add to cart now!
This compact (0.4" x 0.5") switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 9 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output. The pins have a 0.1" spacing, making...
DC-DC boost voltage source (voltage boosters), with a wide range of input voltages (3.5 V - 35 V) and output voltages from 4 V to 35 V. It also includes a voltmeter with display to easily monitor the output or input voltage. See description for more details about the product. Add to cart now!
This 250 W boost DC-DC converter can easily provide the necessary power output for your embedded systems and it is a convenient solution for most of your project that require high power. See description for more details about the product. Add to cart now!
This adjustable DC-DC boost converter can be operated from 10 V to 32 V and it can output a voltage up to 35 V. It can be used in powering up various electronic devices and embedded systems. See description for more details about the product. Add to cart now!
This DC-DC step down module is based on MP1584EN chip, this is capable of driving a 3 A load and converts input voltage between 4.5 V to 28 V into smaller voltage between 0.8 V to 20 V. See description for more details about the product. Add to cart now!
A voltage boost that can boost the voltage with a very good output. See Description for more details about the product. Add to cart now!
DC-DC Boost mode with USB plug useful for 5 V power supply, using a lower voltage supply. See description for more details about the product. Add to cart now!
Useful adjustable low voltage power supply to power different projects and observe on-screen tensions. See description for more details about the product. Add to cart now!
Input voltage range: 55.5V Charging cut-off voltage: (4.2V/4.35V) ±0.5% Charging current: 2.4A±5% Boost output voltage: 5V5.15V (wire loss compensation) Boost output voltage ripple: 100mV Weight: 3gm See description for more details about the product. Add to cart now!
Module Type: Step-Up (Boost) Input voltage: 12V-60V Input Current: Maximum input current 15A Output voltage: 12V-80V adjustable Output Current: Maximum output current 10A Output Power: 600W Short circuit protection: Fuse (Input 20A Fuse) Overcurrent protection: Yes See description for more details about the product. Add to cart now!
The S7V7F5 switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.7 V and 11.8 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V. The very compact (0.35" x 0.475")...
DPS3012 Adjustable Power Supply (30 V, 12 A) See description for more details about the product. Add to cart now!
Adjustable source, with color display, output voltage up to 30 V and accuracy of 0.5%. See description for more details about the product. Add to cart now!
This powerful boost regulator efficiently generates an output voltage of 24 V from an input voltage as low as 2.9 V while allowing an input current as high as 5 A. See description for more details about the product. Add to cart now!
DC-DC 1.8V-5V to 3.3V, Booster and Buck Power Module See description for more details about the product. Add to cart now!
Adjustable source, with color display, output voltage up to 50 V and accuracy of 0.5%. See description for more details about the product. Add to cart now!
Adjustable source, with color display, output voltage up to 30V and accuracy of 0.5%.See description for more details about the product. Add to cart now!
This compact (0.45"x0.6") U1V11F3 switching step-up (or boost) voltage regulator efficiently generates 3.3 V from input voltages as low as 0.5 V. Unlike most boost regulators, the U1V11F3 offers a true shutdown option that turns off power to the load, and it automatically switches to a linear down-regulation mode when the input voltage exceeds the output....
300W 20A DC-DC Buck Converter Step-down Module Constant Current See description for more details about the product. Add to cart now!
Max Output Current: 12 V Maximum Output Current: 3A Conversion efficiency: can up to 97.5% Switch frequency: 500KHz Operating temperature: Industrial grade (-40 ° to + 85 °) Improve conversion efficiency See description for more details about the product. Add to cart now!
Model type: DC-DC Step Down Power Supply Module Size: 26 x 17.2mm Input voltage: 8-55V Output voltage: 12V Dissipation Power: 2A See description for more details about the product. Add to cart now!
Working voltage: DC 9V - 36V Output voltage: 5.2V/5A/25W 9~24V input: Output 5.2V/6A/30W 24~32V input: output 5.2V/5A/25W 32~36V input: output 5.2V/3.5A/18W See description for more details about the product. Add to cart now!
This low voltage source can be adjusted, you can get voltages between 0.8 V and 17 V via potentiometer setting and have a maximum output current of 3 A. See description for more details about the product. Add to cart now!
24 V 2 A (48 W) Switched Mode Power Supply See description for more details about the product. Add to cart now!
Source 5 V switching regulator 10 A (50 W). See description for more details about the product. Add to cart now!
AC-DC AC power supply with 230 V AC power supply providing a stable 5 V DC output voltage at a maximum current of 4 A. See description for more details about the product. Add to cart now!
This voltage source is supplied from the AC network and has an output of 5 V, maximum current of 40 A and efficiency of 80%. See description for more details about the product. Add to cart now!
This is an adjustable voltage source DC-DC buck 12 A with low ripple which is useful for your project See description for more details about the product. Add to cart now!
This product is ideal for collecting low voltages from devices such as mini-solar panels, thermoelectric generators and others. It can operate with voltages of at least 20 mV. See description for more details about the product. Add to cart now!
This DC to DC boost module converts low voltages between 2.5 V and 12 V to come to a fix voltage of 12 V. See description for more details about the product. Add to cart now!
This 24 V DC-DC boost module is perfect for your projects that require higher voltage. This small module provides the ability to increase voltage and adjusted from 2.5 V to 16 V. See description for more details about the product. Add to cart now!
With this source you can charge mobile phones or other devices that need charging voltage 5 V using a cell batteries at 3.7 V. See description for more details about the product. Add to cart now!
Switching voltage source 24 V 15 A (360 W) See description for more details about the product. Add to cart now!
Switched Mode Power Supply 12 V 3 A (36 W)
This product is an AC DC voltage source that feeds to the 230 V AC supply network and provides a fixed and stable 12V DC output voltage supplying a maximum current of 30 A. Also, the maximum power output from the source is 360 W. See description for more details about the product. Add to cart now!
12 V 5 A (60 W) Switched Mode Power Supply See description for more details about the product. Add to cart now!
12 V 50 A (600 W) Switched Mode Power Supply See description for more details about the product. Add to cart now!