Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
0104110000023674
New product
Regular normal relay mode with delay.
See description for more details about the product.
Add to cart now!
409 Item Items
Warning: Last items in stock!
Availability date:
1. Power the module.
The module is powered by a 12 V DC voltage. Screw terminals are marked with VCC andGND.
WARNING! Be careful to observe the polarity, thus damaging the product.
2. Relay coupling.
The relay is coupled when the connection between the red-pinned pins is attached to the picture attached below and a configurable time is activated with the S1, S2 and S4 jumper and via the blue potentiometer marked TIME-ADJ. The green LED illuminates during the relay activation.
3. Setting the coupling time.
Refer to the attached table below to configure the relay switching time. Also, the relay is switched on when the green LED is on.
Example: In the attached picture below, jumper S1 is disconnected and jumper S2 is connected. Thus, the coupling time is between 0.13 seconds and 1.3 seconds. Then the time is adjusted with the blue potentiometer. The time decreases when it is rotated counterclockwise and increases when it is rotated clockwise.
Relay Module with 12 V Trigger Signal (30 A)...
$5.28
DC-DC Connector Pair See description for more...
$0.60
Black and Blue Colored Cap for Potentiometer...
$0.24
The I2C LCD backpack is a small PCB that can be...
$1.29
This cooler will help prevent your device from...
$1.88
This is applicable to your projects that use...
$8.97
The module is programmable using AT command...
$3.60
The Relay Expansion enables your Omega to...
$12.00
Real-Time clock module based on the DS1307...
$2.28
M3 Nut is intended to give the user a simple...
$0.06