Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 8:30 - 17:30, pauza 12:30 - 13:30.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
All Products
- Stock Clearance
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
-
Filaments
- ABS Filaments
-
PLA Filaments
- Classic PLA Filaments
- EasyPrint PLA Filaments
- HD PLA Filaments
- Easy PLA Filaments
- Mineral PLA Filaments
- PLA PRO Filaments
- Ingeo 3D850 PLA Filaments
- Ingeo 3D870 PLA Filaments
- PHA / PLA Filaments
- Glitter PLA
- Premium PLA
- EasyFil PLA
- GalaxyPLA
- Volcano PLA
- Armour-D PLA
- Silk Gloss PLA
- Matt PLA
- ReForm rPLA
- MagicFil Thermo PLA
- PLA Special Filament
- High Speed PLA
- Chameleon PLA
- Nylon Filaments
- PETG Filaments
- ASA Filaments
- HIPS Filaments
- Lemn Filaments
- Metal Filaments
- Glossy Polymer Filaments
- Carbon Fiber Filaments
- PVA Filaments
- Flexible Filaments
- Other Filaments
- Coating Liquid
- Co-polyesters Filaments
- Composite Materials Filament
- STYX-12
- Thibra3D Skulpt
- Arnite® ID 3040
- Novamid® ID 1030 (PA6/66)
- Poliamide
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- ODROID Boards
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Pycom Boards
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Resealed
- Storage systems
- Flotilla modules
Manufacturers
Viewed products
-
Plusivo PVC Insulated...
6 Colors of Solid Core Wire 22 AWG -...
All Products There are 6991 products.
-
-
Steam Sensor
This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. See description for more details about the product. Add to cart now!
$5.70Out of stock -
Autoleveling Sensor for Tarantula 3D Printer
Autoleveling Sensor for Tarantula 3D Printer See description for more details about the product. Add to cart now!
$23.76Out of stock -
HC-SR04P Ultrasonic Distance Sensor (3 - 5.5 V)
HC-SR04P Ultrasonic Distance Sensor (3 - 5.5 V)
$1.68Out of stock -
INA3221 Triple Low/High Side Current Sensor Module with I2C Interface
The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUS-compatible interface. See description for more details about the product. Add to cart now!
$18.00Out of stock -
Sharp GP2Y0A02YK0F Analog Distance Sensor 20-150cm
The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8" to 60" (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to sonar in some applications. The distance is indicated by an analog voltage, making this sensor very easy to use. See Description for more details...
$21.60Out of stock -
VL6180X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 60cm max
This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). See description for more details about the product. Add to cart now!
$14.40Out of stock -
ACS712 Hall Current Sensor (20 A)
High performance bidirectional current sensor based on Hall effect. See description for more details about the product. Add to cart now!
$3.12Out of stock -
VL53LDK TOF Based LIDAR Laser Distance Sensor
VL53LDK TOF Based LIDAR Laser Distance Sensor See description for more details about the product. Add to cart now!
$3.60Out of stock -
INA219 I2C Current Sensor with I2C Interface
1 Review(s)This product is a zero- drift bidirectional current sensor which can be used to monitor the current flowing from the power source to your project. See description for more details about the product. Add to cart now!
$4.80Out of stock -
50A Current Sensor
This is the breakout board for the fully integrated hall effect based linear current sensor ACS756.
$14.40Out of stock -
MS1100 Gas Concentration Sensor for Formaldehydes and Benzene
MS1100 Gas Concentration Senzor for Formaldehydes and Benzens See description for more details about the product. Add to cart now!
$16.80 $24.00Out of stock -
ACS709 Current Sensor (from -75 A to + 75 A)
This board is a simple carrier of Allegro’s ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation up to 2.1 kV RMS. The sensor has optimized accuracy for currents from -37.5 A to 37.5 A, and the analog voltage output is linear for current magnitudes...
$24.00Out of stock -
Non-invasive AC Current Sensor SCT-013 (100A max)
1 Review(s)Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor See description for more details about the product. Add to cart now!
$9.60Out of stock -
Non-invasive AC Current Sensor SCT-013 (30A max)
Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor See description for more details about the product. Add to cart now!
$13.20Out of stock -
ACHS-7121 Current Sensor Carrier -10A to +10A
This board is a simple carrier of Broadcom’s bidirectional ±10A ACHS-7121 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 10 A and outputs a proportional analog voltage (185 mV/A) centered at 2.5...
$10.80Out of stock -
ACHS-7123 Current Sensor Carrier -30A to +30A
This board is a simple carrier of Broadcom’s bidirectional ±30A ACHS-7123 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 30 A and outputs a proportional analog voltage (66 mV/A) centered at 2.5 V...
$7.20Out of stock -
ACHS-7122 Current Sensor Carrier -20A to +20A
This board is a simple carrier of Broadcom’s bidirectional ±20A ACHS-7122 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 20 A and outputs a proportional analog voltage (100 mV/A) centered at 2.5...
$7.20Out of stock -
ACS711EX Current Sensor Carrier -15.5A to +15.5A
This board is a simple carrier of Allegro’s ±15.5 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. See description for more details about the product. Add to cart now!
$6.00Out of stock -
ACS711EX Current Sensor (From -31 A To +31 A)
This board is a simple carrier of Allegro’s ±31 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 31 A and outputs a proportional analog voltage centered at Vcc/2...
$7.20Out of stock -
ACS711LC Current Sensor Carrier -25A to +25A
This board is a simple carrier of Allegro’s ±25A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 25 A and outputs a proportional analog voltage centered at Vcc/2...
$8.64Out of stock -
ACS724 Current Sensor Carrier -20A to +20A
This board is a simple carrier of Allegro’s bidirectional ±20A ACS724LLCTR-20AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 20 A and outputs a proportional analog voltage (100 mV/A) centered...
$9.60Out of stock -
ACS724 Current Sensor Carrier -5A to +5A
This board is a simple carrier of Allegro’s bidirectional ±5A ACS724LLCTR-05AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 5 A and outputs a proportional analog voltage (400 mV/A) centered...
$20.16Out of stock -
ACS724 Current Sensor Carrier -50A to +50A
This board is a simple carrier of Allegro’s bidirectional ±50A ACS724LLCTR-50AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 50 A and outputs a proportional analog voltage (40 mV/A) centered...
$27.36Out of stock -
ACS724 Current Sensor Carrier 0 to 10A
This board is a simple carrier of Allegro’s unidirectional 10A ACS724LLCTR-10AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 10 A and outputs a proportional analog voltage (400 mV/A) that measures 500 mV...
$9.60Out of stock -
ACS724 Current Sensor Carrier 0 to 30A
This board is a simple carrier of Allegro’s unidirectional 30A ACS724LLCTR-30AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 30 A and outputs a proportional analog voltage (133 mV/A) that measures 500 mV...
$9.60Out of stock -
-
MG996 Digital Metal Servomotor (90°)
This servomotor is the improved version of the MG995, has increased accuracy and ideal for high precision projects. See description for more details about the product. Add to cart now!
$7.20Out of stock -
Sequent Microsystems Pluggable Breakout Card Type-3 Accepting 24-14 AWG Wires for Raspberry Pi
Routes all 40 I/O and power pins to pluggable terminal blocks Easy and secure field installation and debugging 150 mils Pitch Heavy Duty Pluggable Terminal Block Connectors Terminals rated voltage: 300V Terminals rated current: 8A Wire range: 24 - 14 AWG Brass standoffs, screws and nuts included See description for more details about the product....
$23.37Out of stock -
Sequent Microsystems Home Automation 8-Layer Stackable Card for Raspberry Pi
32-bit Processor running at 48MHz Eight relays with status LEDs and pluggable connectors Eight layer stackable Eight 12-bit A/D inputs Four 12-bit DAC outputs (0-10V dimmers) or Four open-drain outputs (30V/5.7A MOSFETs) Eight optically isolated digital inputs 30 GPIOs (26 GPIOs from Raspberry Pi + 4 new) On-board hardware watchdog On-board...
$58.41Out of stock -
Sequent Microsystems Industrial Automation 8-Layer Stackable Card for Raspberry Pi
Four Optically Isolated Digital Inputs with status LEDs Four 0 - 10V or 0 - ±10V Analog Inputs Four Optically Isolated 4-20mA Inputs Four Optically Isolated Open Drain Outputs, 24V/4A Four 0-10V Analog Outputs Four 4-20mA Analog Outputs Four General Purpose LEDs TVS Protection on all Inputs RS485 and CAN Ports 24VDC Power Supply On Board...
$105.14Out of stock -
Sequent Microsystems Building Automation 8-Layer Stackable Card for Raspberry Pi
Eight jumper selectable Universal Inputs 1K or 10K thermistors 0-10V analog inputs Dry contact/counter inputs Four AC Triac Outputs, 0.5A/500V Four 0-10V Outputs 24VAC Power Supply Four General Purpose LEDs RS485 In and Out ports Real Time Clock with Battery Backup Pluggable Connectors Hardware Watchdog Status LEDs on all Digital Inputs...
$93.46Out of stock -
1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Module
Input voltage: 8 to 60V Input Current: 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A Quiescent current: 15mA (measured at 12V to 20V, the higher output voltage will increase the quiescent current) Output voltage: 12 – 97V continuously adjustable Output Current: 35A MAX, See description for more...
$35.76Out of stock -
Sequent Microsystems Spring Loaded Breakout Card Type-2 Accepting 22-18 AWG Wires for Raspberry Pi
3.5mm Pitch PCB Spring-loaded Terminal Block Connectors Stainless steel wire guard Phosphor bronze, tin plated pin header Rated Voltage: 300V Rated Current: 5A Contact Resistance: 20 mOhms Insulation Resistance: 5000 MOhms/DC 1000V Wire Range: 22-18 AWG Strip Length: 8-9 mm See description for more details about the product. Add to cart now!
$16.36Out of stock -
Sequent Microsystems Screw Mount Breakout Card Type-1 Accepting 26-18 AWG Wires all Raspberry Pi
Routes all 40 I/O and power pins to screw terminal blocks Permits easy and secure field installation Prototype area for your custom projects 2.54mm Pitch PCB screw Terminal Block Connectors Rated voltage: 300V Rated current: 10A Wire range: 24 - 18 AWG See description for more details about the product. Add to cart now!
$14.02Out of stock -
Sequent Microsystems RTD Data Acquisition 8-Layer Stackable Card for Raspberry Pi
Two ADS1248 24 bit delta-sigma converters (four channels each) Factory accuracy: 0.1% Maximum accuracy (through calibration): 0.01% Pluggable connectors On-board hardware watchdog On-board resettable fuse Eight Level Stackable Command line, Python drivers Node-Red code examples Optional -50oC to 450oC PT100 thermocouples See description for...
$46.73Out of stock -
Sequent Microsystems Watchdog with Battery Backup for all Raspberry Pi’s
A must for all RPI mission critical installation Cycle RPI power after software lock-up Prevent SD Card damage during power outages Run for hours on Li-Ion 18650 battery On board battery charger, step-up converter and intelligent power monitor Dual power supply jacks: micro USB and barrel Provide up to 3.5A/5V power to Raspberry Pi from Li-Ion...
$29.21Out of stock -
6kg*cm Plastic Gears Analog Servomotor
6kg*cm Plastic Gears Analog Servomotor See description for more details about the product. Add to cart now!
$7.95 $16.08Out of stock -
9 g Servomotor, 270° Rotation and Metallic Reducer
9 g Servomotor, 270° Rotation and Metallic Reducer
$15.12Out of stock -
Sequent Microsystems Raspberry Pi MOSFETS 8-Layer Stackable Card for Raspberry Pi
Eight MOSFETs with Status LEDs Pluggable Connectors 4 High Current Loads, 10A/24VDC 4 High Voltage Loads, 2A/240VDC Software self-test Command Line and Python Drivers See description for more details about the product. Add to cart now!
$46.73Out of stock -
Standard 20kg.cm Metal Gear Digital Brushless Servo FT517BL
Standard 20kg.cm Metal Gear Digital Brushless Servo FT517BL See description for more details about the product. Add to cart now!
$86.16Out of stock -
DPS5015 Adjustable Power Supply (50 V, 15 A)
1 Review(s)Adjustable source, with color display, output voltage up to 50 V and accuracy of 0.5%. See description for more details about the product. Add to cart now!
$83.76Out of stock -
Prong Soil Moisture Sensor for BBC micro:bit
The Kitronik Prong soil moisture sensor for BBC microbit is a sensor board that can be directly mounted to a BBC micro:bit to monitor moisture present in soil. See description for more details about the product. Add to cart now!
$6.00Out of stock -
Photoelectric Beam Sensor, Retro Reflection - PEM10D
Photoelectric beam sensor, retro reflection - PEM10D See description for more details about the product. Add to cart now!
$64.56Out of stock -
DC-DC DC8-55V to 12V 2A Step Down Buck Module Regulated Power Supply Module 2A High Current Circuit Board
Model type: DC-DC Step Down Power Supply Module Size: 26 x 17.2mm Input voltage: 8-55V Output voltage: 12V Dissipation Power: 2A See description for more details about the product. Add to cart now!
$4.80Out of stock -
DPS3005 Adjustable Power Supply (30 V, 5 A)
Adjustable source, with color display, output voltage up to 30 V and accuracy of 0.5%. See description for more details about the product. Add to cart now!
$60.00Out of stock -
Sequent Microsystems 8 Relays 8-Layer Stackable Card for Raspberry Pi
Eight RELAYS with Status LEDs Eight layer stackable to 64 relays Heavy Duty Pluggable Terminal Blocks 4 Relays with NO and NC Contacts, rated 4A/120VAC or 4A/24VDC 4 Relays with NO only Contacts rated 8A/48VAC or 8A/24VDC Software self-test Command Line and Python Drivers See description for more details about the product. Add to cart now!
$35.05Out of stock -
Sequent Microsystems DIN-RAIL Kit Type 1 Parallel Mount for all Raspberry Pi’s
Installs Raspberry Pi parallel to DIN-Rail Works for all versions of Pi from Zero to 4 Adapter plate pattern permits 90% rotation All required hardware included See description for more details about the product. Add to cart now!
$11.68Out of stock
